Hope Pro 2 EVO, ENVE M60 Forty Wheel - 29in Rear

$1,201.00

Select Hub
Show Details
Special Note: Due to the nature of anodization processing, slight variances in color may occur.

Hope's lightweight Pro II rear disc hub represents the next evolution in hub design with performance and durability capable of handling your aggressive style. The hub body is machined from a solid billet of 2014 T6 aluminum and features features 4 high-quality sealed cartridge bearings and a 6-bolt, ISO disc rotor mount. The hub's one-piece, 7075 aluminum freehub body has four pawls that engage the twenty-four tooth steel ratchet fixed into the hub shell and sealed with a frictionless, non-contact labyrinth seal. Sram/Shimano 9/10-speed compatible. Black, silver, blue, grey, red or gold.
Sram XX1 Hub Body Selection
Show Details
Hope Pro II disc hub body for conversion to SRAM XX1 11-spd.
Select Rim
Show Details
Weight: 397 grams (32 hole)
Drilling: 32 hole
Tubeless Compatible
Disc Only

The ENVE M60 Forty 29 AM carbon clincher rim was specifically designed and shaped to handle the demands of strong aggressive riders dedicated to 29er wheels and pushing the limits on the most punishing of technical trails. Combining lightweight and durability into the ultimate mountain rim starts with a wider 29mm stance to better support larger tires and minimize lateral roll, thus delivering superior stability and tracking in technical terrain. The proprietary laminate and sidewall design allows the rim to carry a much higher spoke tension than any rim in its class. This design dramatically improves nipple seating angles, which extends spoke fatigue life and wheel durability and can be used with a standard tire/tube combination or a tubeless tire. 5 year warranty. Made in Ogden, Utah.
Spoke Lacing Pattern - 3Cross
Show Details
3 Cross
Select Spoke Gauge
Show Details
DT Stainless Spokes
Spoke weights (estimated wt. of 32 spokes at 295mm):
14 gauge silver................ 241 grams
14 gauge black................ 241 grams
14-15 gauge silver........... 211 grams
14-15 gauge black........... 211 grams
14-17 gauge Revolution.... 153 grams
15 gauge silver................ 196 grams
15-16 gauge silver........... 171 grams
Tires (Optional Add-on)
Show Details
Tubes (Optional Add-on)
Show Details
Select Cassette
Show Details

$1,201.00

Add To Cart

Description

Clincher Wheel-No Skewers
Hub: Hope Pro 2 EVO
Rim: ENVE M60 Forty (32 hole only)
Spokes: DT Swiss (options)
Nipples: DT Swiss (options)

Every set of wheels we turn out is built completely by hand to your specifications using DT spokes. From lacing and tensioning, to stress-relieving, re-tensioning and final truing, we take great pride in building the finest wheels available. Please select the drilling, spoke gauge and the spoke nipple that you desire. Tires, tubes and rimstrips are optional additions offered at a 10% savings when you buy a custom wheel.

Our wheel builders recommend using double butted spokes and alloy nipples on this front wheel. You'll reduce the rolling weight with virtually no reduction in strength. Check out your options below.


Please allow 5-7 working days for all custom built wheels prior to ship.

Model Number
-hopcmp2o
Item Code
HOPCMP2O