Industry Nine Torch, NOX AM Carbon Wheel - 29in Rear

Select Hub
Show Details
Special Note: Due to the nature of anodization processing, slight variances in color may occur.

Cassette Body: 9 and 10 speed
Hub Spacing: 142mm
Spoke Drilling: 32 hole
Weight: 287 g.
Skewer Not Included

Fast engagement, durability, and eye-catching colors are featured in the Industry Nine Torch Rear Disc Hub. The Torch has Industry Nine's famous 120 point of engagement and it is convertible to SRAM's XX1 drivetrain. The four-bearing hub utilizes external seals for longevity and moisture prevention, while the oversize axle provides rear end stiffness. The large diameter disc flange improves wheel stiffness and braking torque transfer plus the angled flanges provide lower spoke stresses. Pop-off, interchangeable endcaps are available for QR, 10x135 and 12x135 axle options, making changes for different frame choices easy. Made in the USA.
Sram XX1 Hub Body Selection
Show Details
Convert your Torch hub to the new 11-speed standard from SRAM with this XD1 specific freehub.
Rear Wheel
Show Details
Quick release (QR) rear axle conversion kit for Torch mountain hubs. Easily adapt your rear Torch mountain hub to a quick release (QR) with this kit. Includes QR drive-side endcap, QR non-drive side endcap, drive-side Teflon seal, non-drive side Teflon seal, drive-side O-ring and non-drive side O-ring.
Select Rim
Show Details
The NOX AM 29 Carbon Clincher Rim is a wide, lightweight, asymmetrical, durable, stiff and tubeless ready rim ready to take you up the steepest climbs and down the toughest descents with more speed and precision than you've experienced before. The AM 29 full carbon hookless construction provides the ultimate in stiffness and toughness at the lowest weight possible. It's designed to handle a wide range of riding including extreme all-mountain terrain, Enduro, Super-D and XC racing. UniWeave is NOX's unique carbon layup that uses two different carbon fiber fabrics to improve strength and stiffness, plus maximizes durability. RockGuard HL is a combination of extra material thickness and ideal surface fiber orientations to provide the maximum impact resistance, while the Anti-Burp Bump helps prevent the tire from "burping" air. Rim features 35mm external width, 29mm internal and 25mm depth. Limited 2 year warranty and crash replacement policy.

Weight: 430 grams
Drilling: 32 hole
Tubeless Compatible
Disc Only

Spoke Lacing Pattern - 3Cross
Show Details
3 Cross
Select Spoke Gauge
Show Details
DT Stainless Spokes
Spoke weights (estimated wt. of 32 spokes at 295mm):
14 gauge silver................ 241 grams
14 gauge black................ 241 grams
14-15 gauge silver........... 211 grams
14-15 gauge black........... 211 grams
14-17 gauge Revolution.... 153 grams
15 gauge silver................ 196 grams
15-16 gauge silver........... 171 grams
Select Spoke Nipples
Show Details
Nipple weights (estimated wt. of 32 nipples):
14 gauge brass................ 30.5 grams
14 gauge brass black........ 30.5 grams
14 gauge alloy silver......... 10 grams
14 gauge alloy colored....... 9.5 grams
14 gauge brass x-long....... 40 grams
15 gauge brass................ 32.5 grams
15 gauge alloy silver......... 11 grams
15 gauge alloy colored...... 10.5 grams
15 gauge brass x-long...... 40 grams
Rim Valves
Show Details
The NOX Tubeless Valve Stems are for use with NOX rims for tubeless conversion. NOX's rim profile is a bit deeper than most other mountain rims (deeper = stiffer!), so while you can get away with standard 34mm tubeless valves, we recommend these 48mm versions to give you some extra room to get a pump head on there. The full alloy construction with a vulcanized rubber base doesn't clog with sealant or collapse as you tighten the nut. A rubber O-ring keeps the nut from coming loose. Color is black with a removable valve core. 48mm long and sold as a pair.
Rim Strips (Optional Add-on)
Show Details
The NOX 30mm TPP Tubeless Tape is a tensilized polypropylene (TPP) tape NOX recommends using with the NOX AM rims. NOX rims are designed to be run tubeless without the need for a thick, heavy rimstrip. This tape is thin and extremely lightweight yet surprisingly durable. The 25mm width is recommended for the XCR rims and the 30mm width is recommended for the AM rims. This tape can also be used as a lightweight rim tape (with tubes) as long as the pressure is kept below 40 psi. We recommend replacing your rim tape yearly or more often if you change tires frequently. 5 grams per wheel. 10 yards. 30mm width for XCR rims.
Tires (Optional Add-on)
Show Details
Tubes (Optional Add-on)
Show Details

$806.00

Add To Cart

Description

Clincher Wheel-No Skewers
Hub: Industry Nine
Rim: NOX AM Carbon (32 hole only)
Spokes: DT Swiss (options)
Nipples: DT Swiss (options)

Every set of wheels we turn out is built completely by hand to your specifications using DT spokes. From lacing and tensioning, to stress-relieving, re-tensioning and final truing, we take great pride in building the finest wheels available. Please select the drilling, spoke gauge and the spoke nipple that you desire. Tires, tubes and rimstrips are optional additions offered at a 10% savings when you buy a custom wheel.

Our wheel builders recommend using double butted spokes and alloy nipples on this front wheel. You'll reduce the rolling weight with virtually no reduction in strength. Check out your options below.


Please allow 5-7 working days for all custom built wheels prior to ship.

Model Number
-indcmmbp
Item Code
INDCMMBP