Industry Nine Torch, Stan's ZTR Crest Wheel - 29in Rear

$441.00

Select Hub
Show Details
Special Note: Due to the nature of anodization processing, slight variances in color may occur.

Cassette Body: 9 and 10 speed
Hub Spacing: 142mm
Spoke Drilling: 32 hole
Weight: 287 g.
Skewer Not Included

Fast engagement, durability, and eye-catching colors are featured in the Industry Nine Torch Rear Disc Hub. The Torch has Industry Nine's famous 120 point of engagement and it is convertible to SRAM's XX1 drivetrain. The four-bearing hub utilizes external seals for longevity and moisture prevention, while the oversize axle provides rear end stiffness. The large diameter disc flange improves wheel stiffness and braking torque transfer plus the angled flanges provide lower spoke stresses. Pop-off, interchangeable endcaps are available for QR, 10x135 and 12x135 axle options, making changes for different frame choices easy. Made in the USA.
Sram XX1 Hub Body Selection
Show Details
Convert your Torch hub to the new 11-speed standard from SRAM with this XD1 specific freehub.
Rear Wheel
Show Details
Quick release (QR) rear axle conversion kit for Torch mountain hubs. Easily adapt your rear Torch mountain hub to a quick release (QR) with this kit. Includes QR drive-side endcap, QR non-drive side endcap, drive-side Teflon seal, non-drive side Teflon seal, drive-side O-ring and non-drive side O-ring.
Select Rim
Show Details
Weight: 370 grams (32 hole)
Drilling: 32 hole

Valve and rim strip are NOT included.

One of the lightest 29er options, Stan's ZTR Crest 29er blends features of a ZTR Race rim with a ZTR 355, making it the best of both worlds. This rim offers the wall thickness and corresponding durability of a ZTR 355 with next generation BST (ball and socket technology), creating a wider rim with shorter sidewalls. The ZTR Crest 29-inch rim features a fully welded seam and can be used with a standard tire/tube combination or tubeless tire.

Stan's Patented Bead Socket Technologyâ„¢ (BST) allows the sidewall of the rim to be lowered by 2-3mm. The elimination of the bead hook and the reduction of the sidewall reduce the overall weight of the rim. The curve of the rim sidewall is the same shape as the bead of the tire so they fit together like a ball and socket joint. This design will help reduce the strain on the tire bead while creating a tighter seal.

By lowering the sidewall of the rim, Stan's also reduces the mechanical leverage the tire has on the rim. This makes the rim stiffer and longer lasting by eliminating flexing that can cause cracking.

Finally, with shorter sidewalls the tire should not hit the rim and pinch flat as often as on standard rims, either with or without tubes. This design allows you to run lower pressures and use more of the tire than ever before. The tire will give you better traction than any rim in the world.
Spoke Lacing Pattern - 3Cross
Show Details
3 Cross
Select Spoke Gauge
Show Details
DT Stainless Spokes
Spoke weights (estimated wt. of 32 spokes at 295mm):
14 gauge silver................ 241 grams
14 gauge black................ 241 grams
14-15 gauge silver........... 211 grams
14-15 gauge black........... 211 grams
14-17 gauge Revolution.... 153 grams
15 gauge silver................ 196 grams
15-16 gauge silver........... 171 grams
Select Spoke Nipples
Show Details
Nipple weights (estimated wt. of 32 nipples):
14 gauge brass................ 30.5 grams
14 gauge brass black........ 30.5 grams
14 gauge alloy silver......... 10 grams
14 gauge alloy colored....... 9.5 grams
14 gauge brass x-long....... 40 grams
15 gauge brass................ 32.5 grams
15 gauge alloy silver......... 11 grams
15 gauge alloy colored...... 10.5 grams
15 gauge brass x-long...... 40 grams
Select Rim Strips
Show Details
Specifically designed for wider rims, Stan's No Tubes 25mm rim tape is your wingman on the trail, designed to keep your ZTR rims airtight. Can be used as a lightweight rim tape on any rim. 10 yards x 25mm (1 roll tapes 5 rims - 7 grams per application).

Specifically designed for wider rims, Stan's No Tubes 21mm rim tape can be used as a lightweight rim tape on narrower rims. 10 yards x 21mm (1 roll tapes 5 rims - 5 grams per application).
Rim Valves
Show Details
This custom Presta valve stem features a removable valve core for easier application of Stan's tire sealant. Stan's No Tubes Olympic Valve stem is compatible with UST, TCS, TLR and ZTR mountain rims. Nickel plated. Extended rubber base aids inflation.
Tires (Optional Add-on)
Show Details
Tubes (Optional Add-on)
Show Details

$441.00

Add To Cart

Description

Clincher Wheel-No Skewers
Hub: Industry Nine
Rim: Stan's ZTR Crest Disc (32 hole only)
Spokes: DT Swiss (options)
Nipples: DT Swiss (options)

Every set of wheels we turn out is built completely by hand to your specifications using DT spokes. From lacing and tensioning, to stress-relieving, re-tensioning and final truing, we take great pride in building the finest wheels available. Please select the drilling, spoke gauge and the spoke nipple that you desire. Tires, tubes and rimstrips are optional additions offered at a 10% savings when you buy a custom wheel.

Our wheel builders recommend using double butted spokes and alloy nipples on this front wheel. You'll reduce the rolling weight with virtually no reduction in strength. Check out your options below.


Please allow 5-7 working days for all custom built wheels prior to ship.

Model Number
-indcmp23
Item Code
INDCMP23