Bicycle Tools - Crank, Bottom Bracket
The CCP-4 is specifically designed to remove crank arms from Shimano® Octalink (splined, oversized "pipe billet") spindles, and ISIS Drive® splined systems. NOTE: CCP-4 will not work on crank arms that fit square, tapered bottom bracket spindles. Also note that crankarms with a "one-key release" system ("self extracting") do not require any crank puller tool. The one-key system acts as the remover. If the one-key system is removed, the CCP-4 can be used to pull the arm. 212 g.
The CNW-2 makes chainring bolt set installation and removal easy. It securely holds the slotted nut to prevent spinning when tightening or loosening the bolt. Double-ended to fit most slotted-type nuts, including the Campagnolo® chainring nuts. Note the CNW-2 is a replacement for the CNW-1. 20 g.
The CWP-6 is a compact crank puller with a built-in 8mm hex for removing crank bolts. The CWP-6 includes two rotating tips (11.3mm and 16.3mm), so it can be used to remove splined Shimano® Octalink and ISIS Drive® crank arms, as well as square-holed crank arms. 168 g.
36mm box-end and bottom bracket pin spanner, with replaceable pins. Our popular and versatile Crank Wrenches feature our proven "Y" head design. 243 g.
The green handled SPA-1 fits adjusting cup on many adjustable type bottom brackets. The pin ends are round with a diameter of 2.9mm. Each Pin Spanner is color coated for easy recognition. 67 g.
The SPA-2, with red handle, will fit one-key release retaining rings on Shimano® and Campagnolo® cranksets and the adjusting cone on most freewheel clusters (not freehubs). Adjusts to a wide range of pin hole widths. Pin diameter is nominally 0.090" (2.3mm). Each Pin Spanner is color coated for easy recognition. 67 g.
The yellow handled SPA-4 fits adjusting cone on most 1-piece cranks, using square ends of 4.7mm x 2mm. Each Pin Spanner is color coated for easy recognition. 67g.
This spanner uses hardened, replaceable pins. Designed for heavy-duty use, the distance between pins is adjustable, allowing use on virtually any bottom bracket cup. Also fits the crankarm one-key release locking rings. Pins are 2.3mm (0.0906 inch) diameter. 96 g.
© 2007 The Colorado Cyclist Inc