The CRP-1 is a precision tool for quickly and easily removing the headset crown race from the crown race seat of the fork. Universal design works with 1-inch, 1-1/8 inch, 1-1/4 inch and 1.5-inch crown race/fork (suspension or rigid) combinations. To use, simply turn the two small T-handles to press the thin-edged wedges under the crown race. Then turn the large T-handle to completely pull the crown race from the fork. 193 g.

The CRS-1 offers a faster, safer, and more precise installation. The bearing surface is spared a direct hit by using different inserted setting rings to ensure proper fit on the race. Choose the correct setting ring, then slide the tube over the fork tube and into the top end of the ring. Using a hammer, tap firmly on the end cap of the tube and seat the race into its proper place safely and accurately. The CRS-1 set includes one universal setting tube, three 1" setting rings, and three 1-1/8" setting rings. NOTE: The 838 setting ring for certain Trek&erg; and Klein® carbon forks is not included with the CRS-1. 2.7 lbs.

32mm and 36mm head wrench. Our popular and versatile Head Wrenches feature our proven "Y" head design and all headset wrench openings are Laser cut to ensure a tight, accurate fit. 257 g.

Replacement pins for SPA-6 and HCW-4. Pins are 2.3mm (0.0906 inch) diameter.

32mm head wrench and 15mm pedal wrench. Our popular and versatile Head Wrenches feature our proven "Y" head design and all headset wrench openings are laser cut to ensure a tight, accurate fit (Only headset sizes 30mm, 32mm, 36mm, and 40mm are laser sized). 232 g.

36mm and 40mm "oversize" head wrench. The 40mm size is common for the 1-1/4" threaded headset standard. Our popular and versatile Head Wrenches feature our proven "Y" head design and all headset wrench openings are Laser cut to ensure a tight, accurate fit. 263 g.

The HHP-2 easily and accurately aligns and presses cups, eliminating damaged, dented, chipped, or misaligned bearing cups. Stepped bushings provide a precise fit and alignment for regular and oversized head and hanger cups. The tool can be used on any size pressed headset cup, from 1" all the way to 1.5" cups. The HHP-2 replaces the HHP-1. 6.7 lbs.

Simple and economical, the HHP-3 is designed to install all sizes of head cups and one-piece bottom bracket cups

The HW-2 Professional Headset Locknut Wrench is the answer. It has a thick, semi-box opening and a substantial, extra long handle for a firm and precise grip on most 8 point 32mm and 36mm locknuts. Also fits the fitting on the BBT-8 bottom bracket tool. Made of investment cast tool steel. 448 g.