Santa Cruz 5010 Carbon C Shimano XTR Race Bike With Custom Wheels

$5,887.00

Select Frame
Show Details
Call it cross-country. Call it all-mountain. The Santa Cruz 5010 is a jack-of-all trades, a bike that can handle all riding conditions, and then some, offering plush New Generation VPP suspension in a 27.5"/650b platform. The low bottom bracket height, short chainstays and 125mm of progressive VPP suspension produce a snappy, nimble ride, while the 68 degree head angle and 5 lb. carbon frame insure climbing agility. The 5010 uses a one-piece, continuous carbon fiber lay-up, which allows interlocking fibers to wrap between tubes and removes any excess material from the frame, producing lightweight performance. Santa Cruz put a lot of emphasis on the performance and ride characteristics of their VPP suspension design, with adjustability of shock rates for individual designs, superb pedaling and bump smoothing characteristics. The new frame has all the trimmings demanded today: 144x12mm rear thru-axle spacing, new molded chainstay protector, ISCG-05 carbon tabs, dropper seatpost internal cable routing, 2 water bottle cage mounts and a 73mm threaded BB for creak-free riding. Ride a Santa Cruz 5010 and go where no bike has gone before. 5 year warranty. Shock pump is sold separately.

If the size you need is not in-stock, please feel free to order. We'll have it here in a matter of days.

Frame: Carbon fiber chassis with massive chainstays and rear triangle, tapered head tube, forged upper link, 15mm aluminum pivot axles (2 lower-1 upper) rotating on angular contact bearings, titanium hardware, grease ports, replaceable dropouts, 142x12 rear thru axle and 125mm of Next Generation VPP suspension. ISO brake mounts accommodate up to 185mm rotors. Shock: Fox CTD Kashima. Frame Weight (Med): 5 lbs. Recommended Fork Travel: 130mm. Wheel Size: 27.5". Seatpost: 30.9mm Sizes: SM-XL. Colors: Satin black with white, or orange with lime green


Select Fork
Show Details
After taking a few years off, the RockShox PIKE RCT3 Solo Air comes back in the RockShox lineup, as the ultimate trail fork. A comeback has never been so amazing. Your trail could be a silky smooth ribbon of singletrack, or a rock-infested goat trail in the Alps. Either way, there is a PIKE for you. The Solo Air lets you add air to your forks through a single Schrader valve, filling both the positive and negative air spring chambers simultaneously. Giving you a plush, predictable ride you can set up in seconds, with the lightest weight air spring on the market. The Maxle Lite is a nifty 15mm thru axle system that makes your bike both lighter and stiffer. 130mm travel. Shock pump is included.

Select Pump
Show Details
The high-pressure Fox Factory Shox pump will pressure all Schraeder valve front and rear air suspension systems up to 300 PSI. Built-In air gauge with micro air release button for precise adjustments.
Select Hub
Show Details
Select Rim
Show Details
This kit is priced using the Mavic XM 319 650b/27.5" disc rim, a go anywhere, mid-range disc rim for hand building wheels.

  • Maxtel: Exclusive to Mavic, Maxtal aluminum alloy boosts rim strength by over 30% compared to 6106 alloy, for lighter and better performing rims.
  • SUP (Soudé Usiné Process): Produces an extremely strong, welded and milled rim joint offering superior wheel balance.
  • High-performance cross-mountain rim with Disc-brake compatibility. Black.
  • Weight: 445 g. (32 hole)
  • Drilling: 32 hole

Select Spoke Gauge
Show Details
DT Stainless Spokes
Spoke weights (estimated wt. of 32 spokes at 295mm):
14 gauge silver................ 241 grams
14 gauge black................ 241 grams
14-15 gauge silver........... 211 grams
14-15 gauge black........... 211 grams
14-17 gauge Revolution.... 153 grams
15 gauge silver................ 196 grams
15-16 gauge silver........... 171 grams
Select Spoke Nipples
Show Details
Nipple weights (estimated wt. of 32 nipples):
14 gauge brass................ 30.5 grams
14 gauge brass black........ 30.5 grams
14 gauge alloy silver......... 10 grams
14 gauge alloy colored....... 9.5 grams
14 gauge brass x-long....... 40 grams
15 gauge brass................ 32.5 grams
15 gauge alloy silver......... 11 grams
15 gauge alloy colored...... 10.5 grams
15 gauge brass x-long...... 40 grams
Select Tire
Show Details
A radically redesigned version of the time honored Racing Ralph, Schwalbe took their most successful competition tire, kept the low profile lugs in the middle, and added newly designed 'U-Block' side grips for exceptional traction. The U-block is a high profile lug with a half open serration, which digs in when the bike is put on its side. All this translates into a tire that lets you get up to speed when hammering the flats, and keeps you upright when carving through a corner at speed. The SnakeSkin sidewall guards against abrasion damage, while the specifically shaped and coated tire bead quickly seals on the rim and provides safer seating without the extra weight penalty of true UST tires.

Size: 650b/27.5x2.25
Weight: 530g.
Bead: Foldable
Max PSI:54
Select Hub
Show Details
Select Rim
Show Details
This kit is priced using the Mavic XM 319 650b/27.5" disc rim, a go anywhere, mid-range disc rim for hand building wheels.

  • Maxtel: Exclusive to Mavic, Maxtal aluminum alloy boosts rim strength by over 30% compared to 6106 alloy, for lighter and better performing rims.
  • SUP (Soudé Usiné Process): Produces an extremely strong, welded and milled rim joint offering superior wheel balance.
  • High-performance cross-mountain rim with Disc-brake compatibility. Black.
  • Weight: 445 g. (32 hole)
  • Drilling: 32 hole

Select Spoke Gauge
Show Details
DT Stainless Spokes
Spoke weights (estimated wt. of 32 spokes at 295mm):
14 gauge silver................ 241 grams
14 gauge black................ 241 grams
14-15 gauge silver........... 211 grams
14-15 gauge black........... 211 grams
14-17 gauge Revolution.... 153 grams
15 gauge silver................ 196 grams
15-16 gauge silver........... 171 grams
Select Spoke Nipples
Show Details
Nipple weights (estimated wt. of 32 nipples):
14 gauge brass................ 30.5 grams
14 gauge brass black........ 30.5 grams
14 gauge alloy silver......... 10 grams
14 gauge alloy colored....... 9.5 grams
14 gauge brass x-long....... 40 grams
15 gauge brass................ 32.5 grams
15 gauge alloy silver......... 11 grams
15 gauge alloy colored...... 10.5 grams
15 gauge brass x-long...... 40 grams
Select Tire
Show Details
A radically redesigned version of the time honored Racing Ralph, Schwalbe took their most successful competition tire, kept the low profile lugs in the middle, and added newly designed 'U-Block' side grips for exceptional traction. The U-block is a high profile lug with a half open serration, which digs in when the bike is put on its side. All this translates into a tire that lets you get up to speed when hammering the flats, and keeps you upright when carving through a corner at speed. The SnakeSkin sidewall guards against abrasion damage, while the specifically shaped and coated tire bead quickly seals on the rim and provides safer seating without the extra weight penalty of true UST tires.

Size: 650b/27.5x2.25
Weight: 530g.
Bead: Foldable
Max PSI:54
Select Rim Strips
Show Details
Specifically designed for wider rims, Stan's No Tubes 25mm rim tape is your wingman on the trail, designed to keep your ZTR rims airtight. Can be used as a lightweight rim tape on any rim. 10 yards x 25mm (1 roll tapes 5 rims - 7 grams per application).

Specifically designed for wider rims, Stan's No Tubes 21mm rim tape can be used as a lightweight rim tape on narrower rims. 10 yards x 21mm (1 roll tapes 5 rims - 5 grams per application).
Rim Valves
Show Details
The Stan's No Tubes custom 44mm Presta valve stem converts most 700c rims to tubeless when used with NoTubes 21mm yellow tape and sealant (sold separately). This valve will seal most existing rims that have an inner valve stem hole of 6-8mm. Removable valve core allows easier application of tire sealant. (Rims with no inner spoke holes do not require the yellow spoke tape.)
Select Tubes
Show Details
Size: 650b/27.5 x 2.1-2.3, Removable Presta valve
Valve length: 32mm
Weight: 220 grams
Save 10% on Tubeless Tire Sealant
Show Details
The wheels that you have purchased require no rim strip and include a valve stem for tubeless use. Additionally, the tires that you have selected may be used without tubes. This tubeless technology requires sealant to maintain air pressure.

Sealant helps stop many leaks and flats incurred during normal riding conditions. The solution can be used year round, even in sub freezing temperatures.
Select Crankset
Show Details
Shimano's thoroughbred XTR group is centered around their first-ever two-ring off-road racing crank, which comes in carefully calculated CloseStep gear combinations to match riders' individual style, terrain, and horsepower. With 38-, 40- and 42-tooth Primary Driving Gear choices-the only factor limiting how fast you can go is how much power you can produce.
Select Shifter
Show Details
The Shimano XTR M980 Rapidfire Plus Shifters offer 2-way release for different riding or shifting styles (index finger or thumb.) Pull it with your finger or push it with your thumb, each click of the upper lever releases cable, the same as it always has, but now it swings both ways. The fastening clamp offers variable positioning, allowing you to set up your cockpit just the way you'd like it. Shimano SIS-SP41 outer housing and coated stainless steel cable provide super smooth shifting. Includes front and rear shifters.
Select Front Derailleur
Show Details
Select Rear Derailleur
Show Details
Efficiency was the key principle when designing the XTR M980 10-speed rear derailleur. The derailleur was designed with Shimano's Shadow technology, using a longer swing arm and a tighter spring for crisper shifting when you want it, and less 'ghost shifting' when you don't. This Dyna-Sys rear derailleur will stay in adjustment longer and deliver consistent performance with each ride.
Select Cassette
Show Details
The 10-speed Shimano XTR M980 cassette delivers consistently smooth shifting performance and durability in an innovative, lightweight package. A redesigned tooth profile has been optimized for the narrow HG-X 10-speed chain and Shadow rear derailleur. This lightweight cassette features 5 titanium cogs.
Select Chain
Show Details
The XTR CN-M981 HG-X chain has been specifically designed to meet the needs of the 10-speed Dyna Sys mountain drive train. This new chain uses Sil-Tec, an advanced surface plating technology to increase both performance and durability.
Select Front Brake
Show Details
Race rated to match the power and control of the XTR M985 Race brake while dropping weight by 40g per wheel, the Shimano XTR M987 XCR disc brake will surpass rider expectations for a lightweight brake.
Select Brake Rotor
Show Details
The Shimano XT SM-RT86 6-bolt rotor employs Shimano's Ice technology, featuring an aluminum core with a stainless steel braking surface. The innovative design sheds weight, dissipates heat and dramatically improves overall performance.
Select Rear Brake
Show Details
Race rated to match the power and control of the XTR M985 Race brake while dropping weight by 40g per wheel, the Shimano XTR M987 XCR disc brake will surpass rider expectations for a lightweight brake.
Select Brake Rotor
Show Details
The Shimano XT SM-RT86 6-bolt rotor employs Shimano's Ice technology, featuring an aluminum core with a stainless steel braking surface. The innovative design sheds weight, dissipates heat and dramatically improves overall performance.
Select Rotor Adapter
Show Details
Shimano Disc Brake Adapter
Select Headset
Show Details
For use with low-stack, internal headset designs
Headtube: 1-1/8" Straight.
Steertube (fork): 1-1/8 to 1-1/2" Tapered.
Threadless
Weight: 150 g.

The Chris King InSet 3 Mixed Tapered headset brings King's legendary bearing quality and time-tested durability to contemporary frames with oversized headtubes. Low-stack height headset builds 7075 aluminum caps around the finest stainless steel bearings and as member of the NoThreadSet family, retains the same 10-year warranty. Black, silver, pewter, navy, mango or red.
Select Carbon Stem Spacers
Show Details
Select Handlebar Stem
Show Details
This kit is priced using the Easton EA90 SL stem, with lightweight 3D forged aluminum allows Easton to shave excess material while retaining maximum strength. The Top Lock clamp design and DST faceplate distribute pressure safely across the handlebar's clamping surface, making the EA90 SL safe for carbon and aluminum bars. 31.8" bar. Please select the Easton EA90 SL (the first selections) from the drop-down menu.

Weight: 130 grams(100 mm)
Stem Material:Aluminium

Please select the Easton EA90 SL Stem or if you would prefer a different stem, choose any stem listed in the drop-down menu.
Select Handlebar
Show Details
This kit is priced using the Easton EA70 Riser Bar, Integrating the high-performance of EA70 aluminum alloy with proprietary TaperWall technology yields Easton's strongest and most popular aluminum riser bar. At just 265 grams, the Easton EA70 Riser bar provides a true, no compromises weight and performance advantage. Available in 40mm or 20mm rises with popular 9º back sweep and 685mm width for precise steering and a customizable cockpit. Black.

Material: Aluminum
Clamp Diameter: 31.8mm
Bend: 9 deg.
Rise: 20 or 40mm
Width: 685mm
Weight: 265 g.

Please select the Easton EA70 Riser Bar or if you would prefer a different Bar, choose any Bar listed in the drop-down menu.
Select Grips
Show Details
The Da Bomb Holy Shift Locking Grips are beautifully simple and offer a bomber hold with any hand position, wet or dry. A soft outer layer of Kraton rubber features a unique grid pattern on half of the grip. When you wrap your fingers around the grip they immediately fall into place within the grid for a secure hold. Plus, the grid offers the ability to move your hands around and still maintain grip in the pattern. The Holy Shifts are perfect for carbon bars because the internal plastic sleeves protect the carbon, while double lock-on clamps secure grips in place. (Clamps included.)
Select Saddle
Show Details
This kit is priced using the Douglas Race Evolution Saddle Please select the Race Evolution (the first selection) from the drop-down menu.

Rail Material: Tubular Titanium
Weight: 248 g.

  • Race Evolution combines ergonomic comfort and pro-level performance
  • A recessed center channel is comfortable against soft tissues
  • Newtech foam delivers maximum cushioning
  • Shell is tuned for the perfect combination of flex and stiffness
  • Lightweight tubular titanium rails

Length: 282mm
Width: 136mm

Please select the Douglas Race Evolution Saddle or if you would prefer a different Saddle, choose any Saddle listed in the drop-down menu.
Select Seatpost
Show Details
This kit is priced using the Easton EA70 Zero Seatpost, Easton's EA70 Zero seatpost is built with high-end TaperWall aluminum tubing and features a 2-bolt integrated head, allowing micro adjustments of the saddle position. Sleek, low-profile saddle clamp provides excellent stability, grip and saddle compatibility. Please select the Easton EA70 Zero Seatpost (the first selections) from the drop-down menu.

Weight: 250 grams(30.9 mm)
Seatpost Material:Aluminium

Please select the Easton EA70 Zero Seatpost or if you would prefer a different Seatpost, choose any Seatpost listed in the drop-down menu.

Description

Customize this Santa Cruz 5010 frameset using the high performance, race ready Shimano XTR Race groupset and custom hand-built wheels. If you need some assistance, please don't hesitate to call us at 800-688-8600 and let us answer your questions and guide you through the process.

Santa Cruz Bicycles' newest offering in the 27.5"/650b platform is the aptly named 5010. The Santa Cruz 5010 is the jack-of-all trades, a bike that can handle all riding conditions and then some. The low bottom bracket height, short chainstays and 125mm of progressive VPP suspension produce a snappy, nimble ride, while the 68 degree head angle and 5 lb. carbon frame weight adds climbing agility. The Solo uses a one-piece, continuous carbon fiber lay-up, which allows interlocking fibers to wrap between tubes and removes any excess material from the frame, producing lightweight performance. Santa Cruz Bikes put a lot of emphasis on the performance and ride characteristics of their VPP suspension design, with adjustability of shock rates for individual designs, superb pedaling and bump smoothing characteristics. The new frame has all the trimmings demanded today: 144x12mm rear thru-axle spacing, new molded chainstay protector, ISCG-05 carbon tabs, dropper seatpost internal cable routing, 2 water bottle cage mounts and a 73mm threaded BB for creak-free riding. Ride a Santa Cruz 5010 and go where no bike has gone before. 5 year warranty.

Frame: Carbon fiber chassis with massive chainstays and rear triangle, tapered head tube, forged upper link, 15mm aluminum pivot axles (2 lower-1 upper) rotating on angular contact bearings, titanium hardware, grease ports, replaceable dropouts, 142x12 rear thru axle and 125mm of Next Generation VPP suspension. ISO brake mounts accommodate up to 185mm rotors. Shock: Fox CTD Kashima. Frame Weight (Med): 5 lbs. Recommended Fork Travel: 130mm. Wheel Size: 27.5". Seatpost: 30.9mm Sizes: SM-XL. Colors: Matte black/green or Gloss orange/white.


Model Number
santa-cruz-snaajm37-c14
Item Code
SNAAJM37-C14

Colorado Cyclist Loyalty Rewards Program

Earn 10% of your order as credits for future purchases



How It Works


Place an of $100 or more,
and receive a gift certificate
for 10% of your order total.

What Items Qualify?


Most regular and sale items,
earn you 10% or more back.


Where To Look



Look for the red message on
each item page.

Some items only show rewards
when they have been added to your cart.

Redeeming Rewards


Simply enter your gift certificate
at the time of your next order.

Rewards are not transferrable,
or redeemable for cash or gift certificates.

Rewards will be adjusted on,
returns and to reflect any unearned value.

×

$5 3-DAY SELECT SHIPPING

Qualifying orders will arrive three days from the date of shipment. Orders placed before 5PM EST will ship the same day.



Some Restrictions Apply


  • Limited time
  • In-Stock Only
  • Contiguous United States only (the Lower 48) & excludes PO boxes
  • Excludes complete bikes, bike frames, bike wheels, cargo boxes, car racks, indoor cycles, & all over-sized packages. These items will ship 3-day for $55 or less per over-sized item.
  • Note: Non-qualifying $5 3-Day shipping orders will still qualify for Free Ground Shipping

Christmas Order Deadlines


To receive your order by 12/24, consider the deadlines listed below:

  • UPS Ground 12/15 (Packages shipped ground by 12/18 may arrive by 12/24, but are not guaranteed.)
  • USP 3-Day: 12/19 at 5pm EST
  • USP 2-Day: 12/22 at 5pm EST
  • UPS Next Day Air: 12/23 at 5pm EST
  • USPS is no longer guaranteed for delivery by 12/24/2014

For guaranteed Christmas arrival, items must be in stock at the time of the order. Also, the deadlines may be different for bikes, frames & wheels which require additional time for prep and assembly. Questions? Contact us.

×