Menu

Shopping Cart

Edit Cart
Subtotal: $0.00
Checkout

DT Swiss 240S Disc Custom Handbuilt Wheelset With HED Belgium Plus Disc Rims 700c

Select DT Swiss 240S Front Disc Hub, Road

Details

The super lightweight DT Swiss 240 Road Disc CL Front Hub is famous for its smooth performance and light weight. Hand built in Switzerland with the precision of a fine Swiss watch.

Hub Spacing:100x15mm thru axle
Rotor: Centerlock
Spoke Drilling: 24, 28, 32 hole
Weight: 126 grams

Select HED Belgium Plus Clincher Disc Rim, Front 700c

Details

By making the rim edge wider, the Hed Belgium Series C2 Clincher Plus Disc Rim allows the tire to flow almost perfectly into the rim shape, ushering in a revolutionary step forward in aerodynamic performance. The wider tire mount also creates a larger contact patch with the road which distributes load better and lowers speed-sapping rolling resistance. All said, C2 technology improves aerodynamics, increases the road/tire contact patch for better cornering grip, decreases rolling resistance, and allows the wheel to be more comfortably ridden at a lower tire pressure. The Hed Belgium disc rim features a welded rim joint, disc-only braking, and is made with aluminum alloy that is shot-peened to increase strength. Available 32 hole and weighs 480 g.

Size: 700c
Rim depth: 24mm
Width:25mm
Weight: 480 grams (32 hole)
Drilling:32 hole
Disc Brake
Recommended tire width: 22mm and greater
Tubeless Combatible.

Select Number of Front Spokes - 28 or 32

Details

High spoke counts (having a lot of spokes) and 3X lacing increase the robustness and durability but come with a weight penalty (heavier). Low spoke counts (having less spokes) and 2X lacing decreases the robustness and durability but come with a weight advantage (less weight). You can run a lower spoke count on carbon rims because of the stiffness/strength of carbon. If you need some help or advice, feel free to call or email us. We'll make recommendations based on your unique needs. 1-800-688-8600 or support@coloradocyclist.com.
Select Spokes, Front Wheel

Details

Estimated weight each: 6.94g (264mm length)
Estimated weight of 32 spokes: 222g (264mm length)

The Performance Chart below is intended to help guide you to the correct spoke usage. Please note that the spoke rating can vary based on rider weight or riding terrain. If you need help, please give us a call (800-688-8600) .


The straight guage DT champion® 2.0mm (14 gauge) spoke offers great performance over the full spectrum of wheel builds. Whether you're building a reliable set of road wheels or a set of hard-charging enduro wheels, these spokes build a strong, sturdy wheel.
Select Front Nipples

Details

Nipple: DT Swiss Brass nipple
Nipple height 12mm
Estimated weight each: .98g
Estimated weight of 32 nipples: 31.36

NOTE: Colorado Cyclist will adjust nipple size (1.8 or 2.0mm) based on your choice of spoke size.
Select DT Swiss 240S Rear Disc Hub, Road

Details

Lace up the DT Swiss 240 Road Disc CL Rear Hub into a fast rolling wheel for your bike. These super lightweight hubs, famous for their unique ratcheting system, use a stainless steel quad-bearing system offering superb performance and durability. Hand built in Switzerland with the precision of a fine Swiss watch. Centerlock disc mount.

Cassette Body: Shimano/Sram Road 11-spd
Hub Spacing: 142x12mm thru axle
Rotor: Centerlock
Spoke Drilling: 24, 28, 32 hole
Weight: 228 grams

Select Cassette Freehub Body, DT Swiss

Details

Shimano Hyperglide (HG) Driver for Shimano HG 9, 10, 11-speed road cassettes. (9 and 10 speed cassettes require 1.8mm spacer).
Select HED Belgium Plus Clincher Disc Rim, Rear 700c

Details

By making the rim edge wider, the Hed Belgium Series C2 Clincher Plus Disc Rim allows the tire to flow almost perfectly into the rim shape, ushering in a revolutionary step forward in aerodynamic performance. The wider tire mount also creates a larger contact patch with the road which distributes load better and lowers speed-sapping rolling resistance. All said, C2 technology improves aerodynamics, increases the road/tire contact patch for better cornering grip, decreases rolling resistance, and allows the wheel to be more comfortably ridden at a lower tire pressure. The Hed Belgium disc rim features a welded rim joint, disc-only braking, and is made with aluminum alloy that is shot-peened to increase strength. Available 32 hole and weighs 480 g.

Size: 700c
Rim depth: 24mm
Width:25mm
Weight: 480 grams (32 hole)
Drilling:32 hole
Disc Brake
Recommended tire width: 22mm and greater
Tubeless Combatible.

Select Number of Rear Spokes - 28 or 32

Details

High spoke counts (having a lot of spokes) and 3X lacing increase the robustness and durability but come with a weight penalty (heavier). Low spoke counts (having less spokes) and 2X lacing decreases the robustness and durability but come with a weight advantage (less weight). You can run a lower spoke count on carbon rims because of the stiffness/strength of carbon. If you need some help or advice, feel free to call or email us. We'll make recommendations based on your unique needs. 1-800-688-8600 or support@coloradocyclist.com.
Select Spokes, Rear Wheel

Details

Estimated weight each: 6.94g (264mm length)
Estimated weight of 32 spokes: 222g (264mm length)

The Performance Chart below is intended to help guide you to the correct spoke usage. Please note that the spoke rating can vary based on rider weight or riding terrain. If you need help, please give us a call (800-688-8600) .


The straight guage DT champion® 2.0mm (14 gauge) spoke offers great performance over the full spectrum of wheel builds. Whether you're building a reliable set of road wheels or a set of hard-charging enduro wheels, these spokes build a strong, sturdy wheel.
Select Rear Nipples

Details

Nipple: DT Swiss Brass nipple
Nipple height 12mm
Estimated weight each: .98g
Estimated weight of 32 nipples: 31.36

NOTE: Colorado Cyclist will adjust nipple size (1.8 or 2.0mm) based on your choice of spoke size.
Select Rim Strip, Road

Details

High tensile strength makes Stan's No Tubes rim tape your wingman on the trail. Designed to keep your ZTR rims airtight. Can be used as a lightweight rim tape on any rim. 10 yards x 21mm (1 roll tapes 3-4 rims - 5 grams per application).
*Optional - Install DT 240S Sinc Ceramic Bearings, Disc hubs

Details

No DT Ceramic Bearings needed
*Optional - Install DT Swiss 54 Step Ratchet

Details

No DT Swiss 54 Step Star Ratchets Needed
*Optional - Front Road Rotor – Centerlock

Details

Use the pulldown to search rotors
*Optional - Rear Road Rotor – Centerlock

Details

Use the pulldown to search rotors
*Optional - Add Cassette, Shimano/SRAM

Details

Use the pulldown to search cassettes
*Optional - Select Campagnolo Road Cassette

Details

Use the pulldown to search cassettes
*Optional - Add Cassette, SRAM XDR/XD

Details

Use the pulldown to search cassettes
*Optional - Select Discounted Tubeless Ready Front Tire, Road/Cross

Details

Use the pulldown to search tires
*Optional - Add Colorado Composites 44mm Alloy Valve, Front

Details

No Colorado Composites 44mm Alloy Valve Needed
*Optional - Select Discounted Tubeless Ready Rear Tire, Road/Cross

Details

Use the pulldown to search tires
*Optional - Add Colorado Composites 44mm Alloy Valve, Rear

Details

No Colorado Composites 44mm Alloy Valve Needed
*Optional - Select Discounted Sealant

Details

Use the pulldown to search sealant
*Optional - Select Discounted Front Tire, Road/Cross

Details

Use the pulldown to search tires
*Optional - Select Discounted Front Tube, Road/Cross

Details

Use the pulldown to search tubes
*Optional - Select Discounted Rear Tire, Road/Cross

Details

Use the pulldown to search tires
*Optional - Select Discounted Rear Tube, Road/Cross

Details

Use the pulldown to search tubes
*Optional - Add Discounted Skewers

Details

Customer does not need front and rear quick release skewers.
(This wheelset does not include quick release skewers, although quick release skewer sets are available in the pulldown menu.)

Description

Your DT Swiss 240S disc custom wheelset with HED Belgium Plus Disc rims is proudly handbuilt in Colorado Springs, Colorado, USA.
Every wheel we turn out is built completely by hand to your specifications. All wheels are tensioned, stress-relieved, then re-tensioned before final truing. We have been building custom wheels since 1977 and take great pride in building the finest wheels available.

Please Note:

  • Our wheels are built with a 2-cross or 3-cross lacing pattern (3-cross recommended.)
  • If you intend to use tubeless tires, make sure to select tubeless tape (from the rim tape pull-down menu) and to purchase tubeless valves (available in optional items at the bottom of your build.) Further, select tires from the "Tubeless Ready" tire selection.
  • If you choose to select optional items they will be installed on your wheels (with the exception of the sealant) unless otherwise specified. The sealant is not added because it can leak during shipping. If you are picking up your wheels at our retail location, we can add the sealant for you.
  • Manufacturer warranties are honored for the parts included in your build.
  • Custom wheels typically ship from our shop between 1-3 weeks after you've placed your order depending on how busy our shop is. However, if a part is not immediately available - from us or from our vendors - your build may take longer. We do our best to keep you updated on the situation, and are always happy to provide updates if you reach out. The easiest way to contact us for updates is to send us an email to support@coloradocyclist.com and we will respond as quickly as we can.
Nipple Information
Alloy nipples are much lighter than brass nipples (approximately 20g per wheel) and are recommended for light weight builds. Brass nipples are stronger and less expensive. We've been successfully building wheels with both for many years.

Spoke Information
Colorado Cyclist primarily uses DT Swiss stainless spokes in our builds. This has been our choice for wheel building since the late 1970's and we certainly owe part of our wheel building success to the strength and longevity that DT Swiss spokes offer. We also use the very popular, lightweight and bladed Sapim CX-Ray spokes and have had excellent success with them. Spoke weight, as well as a spoke Performance Chart, are provided in the pull-downs that you'll use to pick your spokes. The Perfomance Chart should be used as a guide to compare the various spokes. However, there are so many variables involved in building a wheel properly (ie. rider weight, terrain, intended use, price, etc.), you may end up with questions. If you need some help or advice, feel free to call or email us. We'll make recommendations based on your unique needs. 800-688-8600 or support@coloradocyclist.com.

NewCondition