Contact Us

Mon-Fri 9am-5pm MST

Subtotal
$0.00

Shimano Ultegra 8000 Build Kit with Custom Wheels - DT Swiss 350 Hubs, Mavic Open Pro UB UST Black Rims

Select Ultegra R8000 Dual Control Shifter

Details

The new Shimano Ultegra ST-R8000 Dual Control Levers allow for more accurate and precise shifting. It has a greater reach for adjusting your brake and gear levers, while the redesigned internal shifting unit ensures a quick and intuitive rear-shifting operation. When paired with the new FD-R8000 front derailleur, your front shifting will be even lighter. Sold as pair. Includes cables and housing.

Weight: 438 grams
11-spd compatible

Select Ultegra R8000 Front Derailleur

Details

The Shimano Ultegra FD-R8000 Front Derailleur provides for ultra-smooth shifting, flawlessly moving your chain up and down your crankset without extra effort. The result is a shift that is precise and direct, with no delay. With a revised actuation ratio in combination with the ST-R8000 shifter and polymer-coated cables, the Shimano Ultegra FD-8000 front derailleur delivers both a shorter stroke at the lever and reduced effort. A redesigned pull arm offers more direct and easy shifting, with equal shifting effort across the range, and stability has been improved with a new support bolt.

For use with double crankset
Braze-on, 31.8mm clamp w/ 28.6mm shim or 34.9mm.
Weight: 92 grams (braze-on)


Select Ultegra R8000 Rear Derailleur

Details

The Shimano Ultegra RD-R8000 SS Rear Derailleur creates a reduction in shifting effort at the lever, at the same time remaining sure, quick and precise. Due to the integrated Shadow RD Technology with its race-proven, low profile design, the derailleur is more compact and fits closer to the frame, ensuring less damage in a crash.

Minimum Sprocket: 11 tooth
Maximum Sprocket: 30 tooth
For double gearing configurations
Weight: 200 grams
11-speed compatible

Select Ultegra R8000 11-spd Cassette

Details

Superior choice is at the heart of Shimano's rider-tuned philosophy, and the Shimano Ultegra CS-R8000 11-speed Cassette reflects that philosophy with gear combinations of 11-25T, 11-28T, 11-30T, 11-32T, 12-25T, 14-28T and 11-34T (CS-HG800-11), giving you all the options you need to tune your ride. The Shimano Ultegra CS-6800 11-speed cassettes use Hyperglide sprockets with revised tooth profiles for reduced wear and lightning quick shifts. A rigid aluminum carrier keeps the cogs in check for improved shifting under the most demanding gear changes. The available ratio combinations work extremely well with standard or compact cranksets. 11-32T gear ratio requires the use of a medium cage rear derailleur.

Gear Ranges: 11-25, 11-28, 11-30, 11-32, 12-25, and 14-28.
Weight: 243 grams (12x25T)
Ratios:
11-25: 11-12-13-14-15-16-17-19-21-23-25
11-28: 11-12-13-14-15-17-19-21-23-25-28
11-30: 11-12-13-14-15-17-19-21-24-27-30
11-32: 11-12-13-14-16-18-20-22-25-28-32
12-25: 12-13-14-15-16-17-18-19-21-23-25
14-28: 14-15-16-17-18-19-20-21-23-25-28

Select Ultegra R8000 Brake Calipers

Details

The new Shimano Ultegra BR-R8000 Dual-Pivot Brake Calipers offers a very sleek design, with narrower gaps between the arms. The wider clearance makes it compatible with larger tire sizes such as 28C. The stabilizer between the axles reduces deformation and improves the braking efficiency, offering a clear contact feeling with balanced rigidity, weight and stopping power. Cable and Housing not included. Sold as front and rear pair. Compatible with wider 28C tire size.
Weight: 360 grams (Front & Rear)


Select Shimano CN-HG700-11 Chain

Details

The Shimano CN-HG701 11-speed chain gets Shimano's symmetrical design for super-smooth shifting and improved durability. The redesigned inner and outer links are optimized to efficiently shift under hard loads and virtually eliminate "chain suck." Features Shimano's PTFE coating for increased durability and corrosion protection. Quick Link included. 253 grams.
Select Ultegra R8000 Crankset

Details

The Shimano Ultegra FC-R8000 HOLLOWTECH II Crankset receives numerous technologies from Dura-Ace R9100 along with shaping which further enhances ULTEGRA'S 4-arm design. Shimano's Rider Tuned chainring combinations offer multiple gearing configurations via a singular BCD platform for excellent versatility. With redesigned chainring tooth profiling first introduced for DURA-ACE R9100, the ULTEGRA FC-R8000 Crankset is optimized for the latest disc brake frame designs without the need to increase q-factor. The optimized lightweight crank arm design produces excellent power transfer efficiency, while the redesigned chainring tooth profiling increases clearance between chain and leading teeth to also provide compatibility with frames featuring 135mm O.L.D. and 410mm chainstay length. 11-speed compatible.

Crank arm lengths: 165mm, 170mm, 172.5mm or 175mm
Rider Tuned gear combinations: 46-36T, 50-34T, 52-36T, 53-39T
Weight: 674 grams (170mm, 50-34T)

Ultegra SM-BBR60/SM-BBR60-PB Bottom Bracket sold separately

Select Ultegra Bottom Bracket

Details

Shimano Ultegra BB72, BBR60 Hollowtech II Bottom Brackets. Reduced size for light weight. New seal construction for smoother rotation. Requires TL-FC34 or included TL-FC24 adaptor for installation & removal.

English Thread
Spindle Interface Type: Shimano Hollowtech II
Bottom Bracket Shell I.D.: 1.37
BB Shell Width (mm): 68 mm
Defined Color: Black
BB/Frame Interface: English
Weight: 77 g
Threading: English or Italian threading.
Press Fit BB72-41B: "BB86" to fit 86.5mm shell width, 41mm cup diameter.

Italian Thread
Spindle Interface Type:
Shimano Hollowtech II
Bottom Bracket Shell I.D.: 36
BB Shell Width (mm): 70 mm
BB/Frame Interface: Italian
Weight: 77 g

BB72-41B Press-Fit
Spindle Interface Type:
Shimano Hollowtech II
Bottom Bracket Shell I.D.: 41
BB Shell Width (mm): 86 mm
Defined Color: Black
BB/Frame Interface: BB86
Weight: 69 g





*Optional - Conversion Kit for Chris King BB - Shimano

Details

If you did not order a Chris King Bottom Bracket, you do not need a King Conversion BB Kit.
*Optional - Select Color, Chris King BB Only

Details

No Chris King Bottom Bracket was ordered.
*Optional- Select Headset - Road

Details

*Optional - Select Handlebar Stem - Road

Details

No handlebar stem is required on this order. If you'd like to order a handlebar stem, use the pulldown below to browse your selections.
*Optional - Select Handlebar - Road

Details

No handlebar is required on this order. If you'd like to order handlebars, use the pulldown below to browse your selections.
*Optional - Select Handlebar Tape - Road

Details

No handlebar tape is required on this order. If you'd like to order handlebar tape, use the pulldown below to browse your selections.
*Optional - Select Saddle - Road

Details

No saddle is required on this order. If you'd like to order a saddle, use the pulldown below to browse your selections.
*Optional - Select Seatpost - Road

Details

No seatpost is required on this order. If you'd like to order a seatpost, use the pulldown below to browse your selections.
Select DT 350 Front Road Hub

Details

The DT Swiss 350 Front Road hub is the perfect hub for the rider looking for the most affordable high performance hub available. High quality bearings and seals provide smooth rotation and durability. The shell is constructed from 7000 series aluminum. QR Skewer not included.

Hub Spacing: 100mm/QR
Axle Type:Quick Release Skewer
Spoke Drilling: 20, 24, 28, 32 hole
Weight: 149 grams
Skewer not included

Select Mavic Open Pro UB UST Black Front Rim 700c

Details

The Mavic Open Pro UB UST Rim is a tubeless compatible, durable road rim for racing and training. The redesigned rim utilizes Mavic's Exclusive Inter Spoke Milling 4 Dimensions (ISM 4D), which significantly reduces weight and inertia without compromising durability. The smooth profile also helps by reducing aerodynamic drag, while the 19mm internal width accommodates 25-47mm tire widths. The rim can be setup tubeless with Mavic UST valves, tape and tubeless tires. A tubeless setup provides comfort, improved rolling resistance, and puncture resistance. Max PSI for tubeless setup is 87 PSI. 


Size: 700c
Weight: 430 grams
Drilling: 24, 28, 32 or 36 hole
Tubeless Compatible with the Mavic UST Valves and Rim Tape


Select Number of Front Spokes - 24, 28 or 32

Details

High spoke counts (having a lot of spokes) and 3X lacing increase the robustness and durability but come with a weight penalty (heavier). Low spoke counts (having less spokes) and 2X lacing decreases the robustness and durability but come with a weight advantage (less weight). You can run a lower spoke count on carbon rims because of the stiffness/strength of carbon. If you need some help or advice, feel free to call or email us. We'll make recommendations based on your unique needs. 1-800-688-8600 or support@coloradocyclist.com.
Select Spokes, Front Wheel

Details

Estimated weight each: 6.94g (264mm length)
Estimated weight of 32 spokes: 222g (264mm length)

The Performance Chart below is intended to help guide you to the correct spoke usage. Please note that the spoke rating can vary based on rider weight or riding terrain. If you need help, please give us a call (800-688-8600) .


The straight guage DT champion® 2.0mm (14 gauge) spoke offers great performance over the full spectrum of wheel builds. Whether you're building a reliable set of road wheels or a set of hard-charging enduro wheels, these spokes build a strong, sturdy wheel.
Select Front Nipples

Details

Nipple: DT Swiss Brass nipple
Nipple height 12mm
Estimated weight each: .98g
Estimated weight of 32 nipples: 31.36

NOTE: Colorado Cyclist will adjust nipple size (1.8 or 2.0mm) based on your choice of spoke size.
Select DT 350 Rear Road Hub

Details

The DT Swiss 350 rear road hub is the perfect hub for the rider looking for the most affordable high performance hub available. High quality bearings and seals provide smooth rotation and durability. The shell is constructed from 7000 series aluminum, and the patented freewheel system uses precision ratchets for extremely high load capacity and reliability. Quick release skewers not included.

Cassette Body: 11 speed w/ 10s spacer
Hub Spacing: 130mm
Spoke Drilling: 24, 28, 32 hole
Weight: 252 g.
Skewer Not Included

*Optional - Install DT Swiss 36 Step Ratchet

Details

Select Mavic Open Pro UB UST Black Rear Rim 700c

Details

The Mavic Open Pro UB UST Rim is a tubeless compatible, durable road rim for racing and training. The redesigned rim utilizes Mavic's Exclusive Inter Spoke Milling 4 Dimensions (ISM 4D), which significantly reduces weight and inertia without compromising durability. The smooth profile also helps by reducing aerodynamic drag, while the 19mm internal width accommodates 25-47mm tire widths. The rim can be setup tubeless with Mavic UST valves, tape and tubeless tires. A tubeless setup provides comfort, improved rolling resistance, and puncture resistance. Max PSI for tubeless setup is 87 PSI. 


Size: 700c
Weight: 430 grams
Drilling: 24, 28, 32 or 36 hole
Tubeless Compatible with the Mavic UST Valves and Rim Tape


Select Number of Rear Spokes - 24, 28 or 32

Details

High spoke counts (having a lot of spokes) and 3X lacing increase the robustness and durability but come with a weight penalty (heavier). Low spoke counts (having less spokes) and 2X lacing decreases the robustness and durability but come with a weight advantage (less weight). You can run a lower spoke count on carbon rims because of the stiffness/strength of carbon. If you need some help or advice, feel free to call or email us. We'll make recommendations based on your unique needs. 1-800-688-8600 or support@coloradocyclist.com.
Select Spokes, Rear Wheel

Details

Estimated weight each: 6.94g (264mm length)
Estimated weight of 32 spokes: 222g (264mm length)

The Performance Chart below is intended to help guide you to the correct spoke usage. Please note that the spoke rating can vary based on rider weight or riding terrain. If you need help, please give us a call (800-688-8600) .


The straight guage DT champion® 2.0mm (14 gauge) spoke offers great performance over the full spectrum of wheel builds. Whether you're building a reliable set of road wheels or a set of hard-charging enduro wheels, these spokes build a strong, sturdy wheel.
Select Rear Nipples

Details

Nipple: DT Swiss Brass nipple
Nipple height 12mm
Estimated weight each: .98g
Estimated weight of 32 nipples: 31.36

NOTE: Colorado Cyclist will adjust nipple size (1.8 or 2.0mm) based on your choice of spoke size.
Select Colorado Composite/Velox Rim Strips, Road

Details

Colorado Composite 18mm tubeless tape is has been optimized for use with tubeless road rims. Thinner and more compliant, your wheel will recieve a double pass (two wraps) of tape. Use this tape for both tubless tires (requires you to purchase an optional valve) or tires that require tubes.
*Optional - Add Discounted Skewers

Details

Customer does not need front and rear quick release skewers.
(This wheelset does not include quick release skewers, although quick release skewer sets are available in the pulldown menu.)
*Optional - Add Discounted Front Tire 700c

Details

Use the pulldown to search tires
*Optional - Add Discounted Front Tube

Details

Use the pulldown to search tubes
*Optional - Add Discounted Rear Tire 700c

Details

Use the pulldown to search tires
*Optional - Add Discounted Rear Tube

Details

Use the pulldown to search tubes
*Optional - Add Discounted Tubeless Ready Front Tire 700c

Details

Use the pulldown to search tires
*Optional - Add Nox 48mm Valve, Front

Details

Use the pulldown to search tubeless valves
*Optional - Add Discounted Tubeless Ready Rear Tire 700c

Details

Use the pulldown to search tires
*Optional - Add Nox 48mm Valve, Rear

Details

Use the pulldown to search tubeless valves
*Optional - Add Discounted Sealant

Details

Use the pulldown to search sealant

Description

This Shimano Ultegra 8000 Build Kit provides all of the components you'll need to build your frame into a complete bicycle, including custom handbuilt wheels. To begin, pull up our Build Kit Guide and become familiar with your bicycle's technical specifications (ie. headset size, bottom bracket type, crank length and chainrings, cassette configuration, etc.) There are a number of things to figure out, but it should be enticing to get really dialed-in with your bike. If you have questions about the components you need for your frame or bike, contact the company where you purchased it and go through the specification list. Another good idea is to visit the manufacturer's website to research your frame or bike. Manufacturers often have archived files that provide specs on older models. Once you're familiar with the technical specifications, the process should be easy.

Your DT Swiss 350 Classic custom wheelset with Mavic Open Pro UST rims is proudly handbuilt in Colorado Springs, Colorado, USA.
Every wheel we turn out is built completely by hand to your specifications. All wheels are tensioned, stress-relieved, then re-tensioned before final truing. We have been building custom wheels since 1977 and take great pride in building the finest wheels available.

These rims can be used with standard tires and tubes, or tubeless tires. (For tubeless ready, please order tubeless tape and valves.) Never exceed your tire's recommended tire pressure.

Please Note:

  • Our wheels are built with a 2-cross or 3-cross lacing pattern (3-cross recommended.)
  • If you intend to use tubeless tires, make sure to select tubeless tape (from the rim tape pull-down menu) and to purchase tubeless valves (available in optional items at the bottom of your build.) Further, select tires from the "Tubeless Ready" tire selection.
  • If you choose to select optional items they will be installed on your wheels (with the exception of the sealant) unless otherwise specified. The sealant is not added because it can leak during shipping. If you are picking up your wheels at our retail location, we can add the sealant for you.
  • Manufacturer warranties are honored for the parts included in your build.
  • Custom wheels typically ship from our shop between 1-3 weeks after you've placed your order depending on how busy our shop is. However, if a part is not immediately available - from us or from our vendors - your build may take longer. We do our best to keep you updated on the situation, and are always happy to provide updates if you reach out. The easiest way to contact us for updates is to send us an email to support@coloradocyclist.com and we will respond as quickly as we can.
Nipple Information
Alloy nipples are much lighter than brass nipples (approximately 20g per wheel) and are recommended for light weight builds. Brass nipples are stronger and less expensive. We've been successfully building wheels with both for many years.

Spoke Information
Colorado Cyclist primarily uses DT Swiss stainless spokes in our builds. This has been our choice for wheel building since the late 1970's and we certainly owe part of our wheel building success to the strength and longevity that DT Swiss spokes offer. We also use the very popular, lightweight and bladed Sapim CX-Ray spokes and have had excellent success with them. Spoke weight, as well as a spoke Performance Chart, are provided in the pull-downs that you'll use to pick your spokes. The Perfomance Chart should be used as a guide to compare the various spokes. However, there are so many variables involved in building a wheel properly (ie. rider weight, terrain, intended use, price, etc.), you may end up with questions. If you need some help or advice, feel free to call or email us. We'll make recommendations based on your unique needs. 800-688-8600 or support@coloradocyclist.com.

Wheel Building Protocol
  • Choose your rim. Rim details can be obtained by clicking on "Details".

  • Choose the number of spokes and lacing pattern. The available drilling options are listed.

  • Choose the spokes. Spoke details can be found in the pulldown.

  • Choose the nipples. Nipple details can be found in the pulldown.

  • Select any upgrade or add-on (*Optional) that may be offered.

  • If you need assistance, give us a call (800-688-8600) or send us an email (support@coloradocyclist.com).

  • NewCondition