The Tacx NEO 2T Smart Bike Trainer takes the pinnacle of indoor bike training and raises it even higher. With an improved design and revamped components, it provides an immersive experience, wider pedal stroke analysis compatibility and even more improvements that make it one of the most quiet, realistic and accurate bike trainers available. Newly redesigned magnets make for a significant improvement in the stillness of NEO 2T Smart. Any noise generated from internal air displacement is greatly reduced, as are vibrations that transfer to the floor at low cadence. The result is a smart trainer that's quieter than ever.
The NEO 2T Smart trainer features a new motor design that delivers more power at low speeds, resulting in a highly improved ride feel during a climb or acceleration. While NEO 2 Smart was equipped with a capacitive left and right detection sensor that accurately measured the exact position of both your legs, NEO 2T Smart takes pedal stroke analysis to the next level. By adding cycling dynamics with standard ANT+ connectivity, you are now able to analyze your pedal stroke via third-party software, including the software on Garmin Edge bike computers.
NEO 2T Smart is designed to simulate an outdoor ride as realistically as possible. It reacts instantly to speed or incline changes and allows for several degrees of movement to the left and right while cycling, following the natural course of your body. It also features dynamic inertia, which controls your mass inertia and compensates for weight, speed and angle of inclination, to make your ride feel as realistic as possible. Use the Tacx software or Zwift app, and experience the road feel feature. It lets the trainer vibrate and simulate the feeling of riding on different road surfaces, such as cobblestone and gravel. And when connected to an external power source, descent simulation accurately simulates a downhill ride.
NEO 2T Smart is able to deliver during the most intense training sessions. Its design integrates 32 neodymium magnets that allow for a high brake force and high power levels. It can resist sprints up to 2,200 watts and simulate climbs up to a 25% incline. And it generates energy from your own cycling movement, meaning there's no need for an external power source or a plug. No matter how intense your workout, this bike trainer is built to last. The rear axle has also been redesigned, making this trainer compatible with more bikes, without the need for adapters.
The NEO 2T Smart trainer is designed to provide a reliable, accurate and consistent measurement of your speed, cadence and power, so you can keep track of your performance and progress. This smart trainer doesn't require calibration, and it measures your data with a maximum deviation of 1%. The trainer communicates via BLUETOOTH Smart technology and ANT+ FE-C protocol, making it compatible with a number of popular training apps. Ride a famous cycling route in the Tacx software, take on the virtual worlds of Zwift, or use other platforms such as TrainerRoad. You can also use the trainer in stand-alone mode. When not connected, it will simulate a flat road; the faster you ride, the higher the resistance. Connect to multiple devices simultaneously, so you can enjoy the software while tracking performance on your Garmin bike computer.
NEO 2T Smart harnesses the innovative power of the Tacx indoor training software. Enjoy your time in the saddle with a library filled with more than 100 high-quality videos that let you experience the rush of riding the steep hills of the Alps or the cobblestone roads of Bologna. Take advantage of efficiently structured training plans, designed for your fitness level to help you meet your unique goals. Race against live opponents, upload GPS data and ride on 3-D maps, create your own workouts based on slope, power, heart rate or FTP, and show off on Strava.
Type of trainer : Interactive Smart direct drive with motor brake
Magnets : 32 Neodymium magnets
Electrical requirements : 110 to 240 Volt
Power Indicator : Multicolor LED
Connection Indicator (ANT/BT) : 2 LEDs
Firmware upgradable : Yes
Cassette compatibility : Shimano/SRAM 8 to 11-speed. Campagnolo, SRAM XD/XDR driver body's sold separately. Not suitable for Specialized SCS system. Cassette not included.
Axle compatibility : QRx130mm, QRx135mm, 12x142mm and 148mm. Adapter for 135x10mm available.
Supplied with: Front wheel support, Quick release for road bikes and mountain bikes (5mm), Direct drive quick release with adapter set 142x12mm & 148x12mm, 1 month Tacx Premium software
Max Power (25mph/hr) : 2200 Watt
Max Incline : 25%
Simulation of descent : Yes
Max Torque : 85 Nm
Max brake force : 250 N
Flywheel : Virtual
Mass Inertia : Variable to 275.6lbs (125kg)
Footprint (LxW) : 22.6" x 29.5"
Height : 21.7"
Folded Dimensions : 24.4" x 10.2" x 17.3"br> Weight : 47.3 lbs
Data Output and Control :
Wireless Communication : ANT+FE-C, Bluetooth Smart Open
Control by : ANT+FE-C bike computers, Connect to computer via ANT+antenna, Smartphone, Stand alone, Tablet
Output : Cadence, Power, Speed
Read out on : Bike computer, Computer with ANT+ antenna, Smartphones, Sports watch, Tablet
Accuracy : <1%