Kit: XTR M985 Race, Hope Pro II, XC-717

$2,894.00

Front Wheel
Show Details
Wheel-No Skewers
Hub: Hope Pro 2 EVO
Rim: Mavic XC-717 Disc
Spokes: DT Swiss (options)
Nipples: DT Swiss (options)
Weight: ??? grams (wt. of 32 hole w/15 gauge spokes and alloy nipples)

Every set of wheels we turn out is built completely by hand to your specifications using DT spokes. From lacing and tensioning, to stress-relieving, re-tensioning and final truing, we take great pride in building the finest wheels available. Please select the drilling, spoke gauge and the spoke nipple that you desire. Tires, tubes and rimstrips are optional additions offered at a 10% savings when you buy a custom wheel.

Our wheel builders recommend using 14/15 gauge double butted spokes and alloy nipples on this front wheel. You'll reduce the rolling weight by approximately 50 grams with virtually no reduction in strength.

Select Spoke Gauge
Show Details
DT Stainless Spokes
Spoke weights (estimated wt. of 32 spokes at 295mm):
14 gauge silver................ 241 grams
14 gauge black................ 241 grams
14-15 gauge silver........... 211 grams
14-15 gauge black........... 211 grams
15 gauge silver................ 196 grams
15-16 gauge silver........... 171 grams
Select Spoke Nipples
Show Details
Nipple weights (estimated wt. of 32 nipples):
14 gauge brass................ 30.5 grams
14 gauge brass black........ 30.5 grams
14 gauge alloy silver......... 10 grams
14 gauge alloy colored....... 9.5 grams
14 gauge brass x-long....... 40 grams
15 gauge brass................ 32.5 grams
15 gauge alloy silver......... 11 grams
15 gauge alloy colored...... 10.5 grams
15 gauge brass x-long...... 40 grams
Select Hub
Show Details
Special Note: Due to the nature of anodization processing, slight variances in color may occur.

Hope's lightweight Pro II front disc hub represents the next evolution in hub design with performance and durability capable of handling your aggressive style. The hub body is machined from a solid billet of 2014 T6 aluminum and features high-quality sealed cartridge bearings and a 6-bolt, ISO disc rotor mount. Optional front hub end caps (purchased separately) allow easy conversion from QR to 15 or 20mm thru-axle. Black, silver, blue, grey, red or gold.
Select Tire
Show Details
This kit is priced using the Kenda Nevegal DTC, NEVEGAL LITE DTC mountain bike tires are made with Dual Tread Compound (DTC) L3R Pro/Stick-E. Tall knobs designed to penetrate and hold on loose terrain. .

Size: 26 x 2.1
Weight: 640 g.
TPI: 120
Bead: Foldable
If you would prefer a different tire, choose any tire listed in the drop-down menu.
Rear Wheel
Show Details
Wheel-No Skewers
Hub: Hop Pro II
Rim: Mavic XC-717 Disc
Spokes: DT Swiss (options)
Nipples: DT Swiss (options)
Weight: grams (wt. of 32 hole w/14 gauge spokes and alloy nipples)

Every set of wheels we turn out is built completely by hand to your specifications using DT spokes. From lacing and tensioning, to stress-relieving, re-tensioning and final truing, we take great pride in building the finest wheels available. Please select the drilling, spoke gauge and the spoke nipple that you desire. Tires, tubes and rimstrips are optional additions offered at a 10% savings when you buy a custom wheel.

Our wheel builders recommend using 14/15 gauge double butted spokes and alloy nipples on this rear wheel. You'll reduce the rolling weight by approximately 50 grams with virtually no reduction in strength.

Select Spoke Gauge
Show Details
DT Stainless Spokes
Spoke weights (estimated wt. of 32 spokes at 295mm):
14 gauge silver................ 241 grams
14 gauge black................ 241 grams
14-15 gauge silver........... 211 grams
14-15 gauge black........... 211 grams
15 gauge silver................ 196 grams
15-16 gauge silver........... 171 grams
Select Spoke Nipples
Show Details
Nipple weights (estimated wt. of 32 nipples):
14 gauge brass................ 30.5 grams
14 gauge brass black........ 30.5 grams
14 gauge alloy silver......... 10 grams
14 gauge alloy colored....... 9.5 grams
14 gauge brass x-long....... 40 grams
15 gauge brass................ 32.5 grams
15 gauge alloy silver......... 11 grams
15 gauge alloy colored...... 10.5 grams
15 gauge brass x-long...... 40 grams
Select Hub
Show Details
Special Note: Due to the nature of anodization processing, slight variances in color may occur.

Hope's lightweight Pro II rear disc hub represents the next evolution in hub design with performance and durability capable of handling your aggressive style. The hub body is machined from a solid billet of 2014 T6 aluminum and features features 4 high-quality sealed cartridge bearings and a 6-bolt, ISO disc rotor mount. The hub's one-piece, 7075 aluminum freehub body has four pawls that engage the twenty-four tooth steel ratchet fixed into the hub shell and sealed with a frictionless, non-contact labyrinth seal. Sram/Shimano 9/10-speed compatible. Black, silver, blue, grey, red or gold.
Select Rear Tire
Show Details
This kit is priced using the Kenda Nevegal DTC, NEVEGAL LITE DTC mountain bike tires are made with Dual Tread Compound (DTC) L3R Pro/Stick-E. Tall knobs designed to penetrate and hold on loose terrain. (the first selections) from the drop-down menu.

Size: 26 x 2.1
Weight: 640 g.
TPI: 120
Bead: Foldable
Note: The wheels in this kit support only standard mountain bike tires. Standard tires are mounted with tubes.

If you would prefer a different tire, choose any tire listed in the drop-down menu.
Mountain Tubes
Show Details
WTB Mountain Buytl Tube:

Manufactured with a high quality butyl rubber for durability and longevity.

Size: 26 x 1.75-2.0 with 36mm Presta valve
Weight: 192 g.

Tire, Tube Repair
Show Details
Velox rim tape is the wheel builder's classic finishing touch, preventing your inner tube against punctures from the spoke holes. Each roll fits one wheel and features adhesive back and pre-cut valve hole. 17mm wide.
Skewers
Show Details
Please select the DT Skewers or if you would prefer a different skewer, choose any skewer listed in the drop-down
Cassette
Show Details
The 10-speed Shimano XTR CS-M980 cassette delivers consistently smooth shifting performance and durability in an innovative, lightweight package. A redesigned tooth profile has been optimized for the narrow HG-X 10-speed chain and Shadow rear derailleur. This lightweight cassette features 5 titanium cogs.

Gear Range: 11-34, or 11-36
Weight: 255g (11-34) or 272g (11-36)
Ratios:
11-34: 11-13-15-17-19-21-23-26-30-34
11-36: 11-13-15-17-19-21-24-28-32-36

Cassette Installation

Cassette Diagram

Chains
Show Details
Weight: 259 g. (114 link)

The XTR CN-M981 HG-X chain has been specifically designed to meet the needs of the 10-speed Dyna Sys mountain drive train. This new chain uses Sil-Tec, an advanced surface plating technology to increase both performance and durability. Shimano Sil-Tec technology adds a low friction surface treatment that runs smoother and lasts longer. The new super narrow XTR CN-M981 HG-X chain with Sil-Tec better holds lubrication and sheds mud easier than the previously unrivalled XTR CN-M980 chain.

Derailleurs, Front
Show Details
Multi Clamp: fits 1-1/8"(28.6), 1-1/4" (31.8) or 1-3/8" (34.9)
Weight: 132 g.
Capacity: 14 tooth

The Shimano XTR FD-M985 top swing front derailleur is designed for use with the Shimano FC-M985 or FC-M980 2x10 cranksets and features universal clamp band mounting. The derailleur accommodates top or bottom pull cable routing.

Features
  • Dyna-Sys front derailleur for all 2x10 cranksets
  • Aluminum band with steel/nickel plated cage
  • Cable routing: Top or bottom pull


Front Derailleur Installation

Front Derailleur Diagram

Derailleurs, Rear
Show Details
For MTB gearing configurations
Short cage
10-speed compatible
Standard rise

Weight: 175 g (GS)

Efficiency was the key principle when designing the XTR M980 10-speed rear derailleur. The derailleur was designed with Shimano's Shadow technology, using a longer swing arm and a tighter spring for crisper shifting when you want it, and less 'ghost shifting' when you don't. This Dyna-Sys rear derailleur will stay in adjustment longer and deliver consistent performance with each ride.

Features
  • Stronger return spring for crisper shifting
  • Longer swing arm for quicker shifting
  • Less chain-slap
  • Capacity : GS 35T, SGS 41T


Rear Derailleur Installation

Rear Derailleur Diagram

Brake Levers, Shifters
Show Details
Compatible with 10-speed Dyna-Sys
2-way release offers index finger or thumb shifting
Weight:224 g./pair

The Shimano XTR M980 Rapidfire Plus Shifters offer 2-way release for different riding or shifting styles (index finger or thumb.) Pull it with your finger or push it with your thumb, each click of the upper lever releases cable, the same as it always has, but now it swings both ways. The fastening clamp offers variable positioning, allowing you to set up your cockpit just the way you'd like it. Shimano SIS-SP41 outer housing and coated stainless steel cable provide super smooth shifting. Includes front and rear shifters.

Shifter Installation

Shifter Diagram

Brakes
Show Details
Race rated to match the power and control of the XTR M985 Race brake while dropping weight by 40g per wheel, the Shimano XTR M987 XCR disc brake will surpass rider expectations for a lightweight brake. Shimano dropped weight by using a magnesium caliper and master cylinder with a carbon fiber lever blade and titanium fasteners. Underpowered brakes lead to defensive riding technique and, ultimately, to slower lap times. Enter the new XCR Race brake, which encourages racers to attack technical downhill sections with confidence, leaving the competition in the dust. Heat buildup is the enemy of any brake system, but the Shimano XTR M987 XCR disc brakes aluminum-backed brake pads and the industry's first full ceramic caliper piston help to dump heat and maintain consistent power. Each individual brake comes with brake lever, and caliper. Rotors are not included.

Hint for breaking-in: New disc brake pads require a certain break-in period in order to provide the full brake power. The following procedure has proved oneself: drag braking on a downhill until the brake power noticeably increases. Then let the brake rotor cool out. Afterwards do 20 full stops braking from a medium speed. Attention: the rotors get very hot, do not touch them!

Brakes
Show Details
Race rated to match the power and control of the XTR M985 Race brake while dropping weight by 40g per wheel, the Shimano XTR M987 XCR disc brake will surpass rider expectations for a lightweight brake. Shimano dropped weight by using a magnesium caliper and master cylinder with a carbon fiber lever blade and titanium fasteners. Underpowered brakes lead to defensive riding technique and, ultimately, to slower lap times. Enter the new XCR Race brake, which encourages racers to attack technical downhill sections with confidence, leaving the competition in the dust. Heat buildup is the enemy of any brake system, but the Shimano XTR M987 XCR disc brakes aluminum-backed brake pads and the industry's first full ceramic caliper piston help to dump heat and maintain consistent power. Each individual brake comes with brake lever, and caliper. Rotors are not included.

Hint for breaking-in: New disc brake pads require a certain break-in period in order to provide the full brake power. The following procedure has proved oneself: drag braking on a downhill until the brake power noticeably increases. Then let the brake rotor cool out. Afterwards do 20 full stops braking from a medium speed. Attention: the rotors get very hot, do not touch them!

Brake Pads, Rotors, Parts
Show Details
Size: 160mm

The Shimano XT SM-RT86 6-bolt rotor employs Shimano's Ice technology, featuring an aluminum core with a stainless steel braking surface. The innovative design sheds weight, dissipates heat and dramatically improves overall performance.

Brake Pads, Rotors, Parts
Show Details
Size: 160mm

The Shimano XT SM-RT86 6-bolt rotor employs Shimano's Ice technology, featuring an aluminum core with a stainless steel braking surface. The innovative design sheds weight, dissipates heat and dramatically improves overall performance.

Cranksets, Bottom Brackets
Show Details
Shimano's thoroughbred XTR M985 Crankset is centered around their first-ever two-ring off-road racing crank, which comes in carefully calculated CloseStep gear combinations to match riders' individual style, terrain, and horsepower. With 38-, 40- and 42-tooth Primary Driving Gear choices-the only factor limiting how fast you can go is how much power you can produce.

Lengths: 170, 172.5, 175 or 180mm
Chainrings: 30x42, 28x40 or 26x38
Weight: 705 g.(30x42, 175mm)

BB cups included

Crankset Installation

Crankset Diagram

Select Headset
Show Details
This kit is priced using the Chris King NoThreadset 1-1/8One of the most renowned components in the cycling universe, the Chris King headset is simply the best in the business. 7075 aluminum cups are built around the finest stainless steel bearings. 10-year warranty. Sotto Voce is available in black, navy, pewter, red or silver..

Weight: 98 g.

Please select the Chris King NoThreadset 1-1/8 or if you would prefer a different Headset, choose any Headset listed in the drop-down menu.
Headset Parts
Show Details
Douglas Carbon Headset Spacer Kit.
Select Saddle
Show Details
This kit is priced using the Douglas Race Evolution Saddle Please select the Race Evolution (the first selection) from the drop-down menu.

Rail Material: Tubular Titanium
Weight: 248 g.

  • Race Evolution combines ergonomic comfort and pro-level performance
  • A recessed center channel is comfortable against soft tissues
  • Newtech foam delivers maximum cushioning
  • Shell is tuned for the perfect combination of flex and stiffness
  • Lightweight tubular titanium rails

Length: 282mm
Width: 136mm

Please select the Douglas Race Evolution Saddle or if you would prefer a different Saddle, choose any Saddle listed in the drop-down menu.
Select Seatpost
Show Details
This kit is priced using the Easton EA70 Zero Seatpost, Easton's EA70 Zero seatpost is built with high-end TaperWall aluminum tubing and features a 2-bolt integrated head, allowing micro adjustments of the saddle position. Sleek, low-profile saddle clamp provides excellent stability, grip and saddle compatibility. Please select the Easton EA70 Zero Seatpost (the first selections) from the drop-down menu.

Weight: 250 grams(30.9 mm)
Seatpost Material:Aluminium

Please select the Easton EA70 Zero Seatpost or if you would prefer a different Seatpost, choose any Seatpost listed in the drop-down menu.
Select Handlebar
Show Details
This kit is priced using the Easton EA70 Riser Bar, Integrating the high-performance of EA70 aluminum alloy with proprietary TaperWall technology yields Easton's strongest and most popular aluminum riser bar. At just 265 grams, the Easton EA70 Riser bar provides a true, no compromises weight and performance advantage. Available in 40mm or 20mm rises with popular 9ยบ back sweep and 685mm width for precise steering and a customizable cockpit. Black.

Material: Aluminum
Clamp Diameter: 31.8mm
Bend: 9 deg.
Rise: 20 or 40mm
Width: 685mm
Weight: 265 g.

Please select the Easton EA70 Riser Bar or if you would prefer a different Bar, choose any Bar listed in the drop-down menu.
Select Handlebar Stem
Show Details
This kit is priced using the Easton EA90 SL stem, with lightweight 3D forged aluminum allows Easton to shave excess material while retaining maximum strength. The Top Lock clamp design and DST faceplate distribute pressure safely across the handlebar's clamping surface, making the EA90 SL safe for carbon and aluminum bars. 31.8" bar. Please select the Easton EA90 SL (the first selections) from the drop-down menu.

Weight: 130 grams(100 mm)
Stem Material:Aluminium

Please select the Easton EA90 SL Stem or if you would prefer a different stem, choose any stem listed in the drop-down menu.
Handlebar Grips, Bar Ends
Show Details
The Da Bomb Holy Shift Locking Grips are beautifully simple and offer a bomber hold with any hand position, wet or dry. A soft outer layer of Kraton rubber features a unique grid pattern on half of the grip. When you wrap your fingers around the grip they immediately fall into place within the grid for a secure hold. Plus, the grid offers the ability to move your hands around and still maintain grip in the pattern. The Holy Shifts are perfect for carbon bars because the internal plastic sleeves protect the carbon, while double lock-on clamps secure grips in place. (Clamps included.)
Select Fork
Show Details
Receive 15% off all forks with a frame, bike or build kit purchase. Sale forks are excluded.

$2,894.00

Add To Cart

Description

Components: XTR M985 Race, Disc Brakes
Wheels: Custom Hope Hubs with Mavic XC-717
Enjoy the advantage of selecting from the finest components and the flexibility of upgrading components. Customize your build kit by selecting from the options available in the pull-down menus below.

Model Number
shimano-xtr-race-ssvbkt11
Item Code
SSVBKT11