Menu

Shopping Cart

Edit Cart
Subtotal: $0.00
Checkout

Hope RS4 Disc Custom Handbuilt Wheelset With Easton R90 SL Disc Rims 700c

Select Hope RS4 Front Disc Hub

Details

The beautifully simple Hope RS4 Center Lock Road Disc Hub is specifically designed for road disc users. The hub shell is machined from a solid billet of 2014 T6 aluminum. Its custom stainless steel cartridge bearings are smooth rolling and ideal for fast road wheels. CenterLock Rotor Mount.

Special Note: Due to the nature of anodization processing, slight variances in color may occur.

Hub Spacing: 100x12mm
Spoke Drilling: 24, 28 or 32 hole
Weight: 115 grams
Thru-Axle (Skewer) Not Included

Select Hope Front Hub Color

Details

Select Number of Front Spokes - 24, 28 or 32

Details

High spoke counts (having a lot of spokes) and 3X lacing increase the robustness and durability but come with a weight penalty (heavier). Low spoke counts (having less spokes) and 2X lacing decreases the robustness and durability but come with a weight advantage (less weight). You can run a lower spoke count on carbon rims because of the stiffness/strength of carbon. If you need some help or advice, feel free to call or email us. We'll make recommendations based on your unique needs. 1-800-688-8600 or support@coloradocyclist.com.
Select Easton R90 SL Clincher Disc Rim, Front 700c

Details

With a wider internal rim width of 19.5 mm, the Easton R90 SL Clincher Disc Rim is perfect for road tires up to large cyclocross and gravel grinding tire volumes. The deep 27-millimeter rim offers improved wheel stiffness and aerodynamics that balance increased rim performance with minimal weight. The R90 SL Disc takes a design queue from Easton's wind tunnel-proven Fantom rim shape for aerodynamics and stability and is welded to save weight. The Easton R90 SL Disc comes in a 28 or 32 spoke hole configurations and is tubeless compatible, making it the perfect replacement disc rim or quick upgrade to your main ride.

Size: 700c
Material: Aluminum/Welded
Finish:Black Anodized/Vinyl Decals
Braking Surface:Disc Only
Rim Depth: 27mm
External Width:24mm
Internal Width:19.5mm
Weight: 455 grams
Drilling:28-hole
Tubeless Compatible.

Select Spokes, Front Wheel

Details

Estimated weight each: 6.94g (264mm length)
Estimated weight of 32 spokes: 222g (264mm length)

The Performance Chart below is intended to help guide you to the correct spoke usage. Please note that the spoke rating can vary based on rider weight or riding terrain. If you need help, please give us a call (800-688-8600) .


The straight guage DT champion® 2.0mm (14 gauge) spoke offers great performance over the full spectrum of wheel builds. Whether you're building a reliable set of road wheels or a set of hard-charging enduro wheels, these spokes build a strong, sturdy wheel.
Select Front Nipples

Details

Nipple: DT Swiss Brass nipple
Nipple height 12mm
Estimated weight each: .98g
Estimated weight of 32 nipples: 31.36

NOTE: Colorado Cyclist will adjust nipple size (1.8 or 2.0mm) based on your choice of spoke size.
Select Hope RS4 Rear Disc Hub

Details

The beautifully simple Hope RS4 Center Lock Disc Rear Hub is specifically designed for road disc users. The hub shell is machined from a solid billet of 2014 T6 aluminum and uses a 7075 aluminum rotor body. 4 pawls engage a 40 tooth steel ratchet, which is fixed into the hub shell and sealed with a frictionless, non-contact labyrinth seal. Its custom stainless steel cartridge bearings are smooth rolling and ideal for fast road wheels. Compatible with 11-speed Shimano/SRAM, and 9/10-speed Shimano/SRAM cassettes by means of a removable spacer. Center Lock Disc Mouint.

Special Note: Due to the nature of anodization processing, slight variances in color may occur.

Hub Spacing: 142x12mm Thru Axle
Optional Spacing: 135x9mm Quick Release
Spoke Drilling: 24, 28 or 32 hole
Weight: 263 grams
Thru Axle (Skewers) Not Included

Select Hope Rear Hub Color

Details

Select Cassette Driver Body

Details

Shimano Hyperglide (HG) Driver for Shimano HG 9, 10, 11-speed road cassettes. (9 and 10 speed cassettes require 1.8mm spacer).
Select Number of Rear Spokes - 24, 28 or 32

Details

High spoke counts (having a lot of spokes) and 3X lacing increase the robustness and durability but come with a weight penalty (heavier). Low spoke counts (having less spokes) and 2X lacing decreases the robustness and durability but come with a weight advantage (less weight). You can run a lower spoke count on carbon rims because of the stiffness/strength of carbon. If you need some help or advice, feel free to call or email us. We'll make recommendations based on your unique needs. 1-800-688-8600 or support@coloradocyclist.com.
Select Easton R90 SL Clincher Disc Rim, Rear 700c

Details

With a wider internal rim width of 19.5 mm, the Easton R90 SL Clincher Disc Rim is perfect for road tires up to large cyclocross and gravel grinding tire volumes. The deep 27-millimeter rim offers improved wheel stiffness and aerodynamics that balance increased rim performance with minimal weight. The R90 SL Disc takes a design queue from Easton's wind tunnel-proven Fantom rim shape for aerodynamics and stability and is welded to save weight. The Easton R90 SL Disc comes in a 28 or 32 spoke hole configurations and is tubeless compatible, making it the perfect replacement disc rim or quick upgrade to your main ride.

Size: 700c
Material: Aluminum/Welded
Finish:Black Anodized/Vinyl Decals
Braking Surface:Disc Only
Rim Depth: 27mm
External Width:24mm
Internal Width:19.5mm
Weight: 455 grams
Drilling:28-hole
Tubeless Compatible.

Select Spokes, Rear Wheel

Details

Estimated weight each: 6.94g (264mm length)
Estimated weight of 32 spokes: 222g (264mm length)

The Performance Chart below is intended to help guide you to the correct spoke usage. Please note that the spoke rating can vary based on rider weight or riding terrain. If you need help, please give us a call (800-688-8600) .


The straight guage DT champion® 2.0mm (14 gauge) spoke offers great performance over the full spectrum of wheel builds. Whether you're building a reliable set of road wheels or a set of hard-charging enduro wheels, these spokes build a strong, sturdy wheel.
Select Rear Nipples

Details

Nipple: DT Swiss Brass nipple
Nipple height 12mm
Estimated weight each: .98g
Estimated weight of 32 nipples: 31.36

NOTE: Colorado Cyclist will adjust nipple size (1.8 or 2.0mm) based on your choice of spoke size.
Select Rim Strip, Road

Details

High tensile strength makes Stan's No Tubes rim tape your wingman on the trail. Designed to keep your ZTR rims airtight. Can be used as a lightweight rim tape on any rim. 10 yards x 21mm (1 roll tapes 3-4 rims - 5 grams per application).
*Optional - Front Road Rotor – Centerlock

Details

Use the pulldown to search rotors
*Optional - Rear Road Rotor – Centerlock

Details

Use the pulldown to search rotors
*Optional - Add Discounted Shimano/SRAM Cassettes

Details

Use the pulldown to search cassettes
*Optional - Add Cassette, SRAM XDR/XD

Details

Use the pulldown to search cassettes
*Optional - Select Campagnolo Road Cassette

Details

Use the pulldown to search cassettes
*Optional - Add Discounted Tubeless Ready Front Tire 700c

Details

Use the pulldown to search tires
*Optional - Add Colorado Composites 44mm Alloy Valve, Front

Details

No Colorado Composites 44mm Alloy Valve Needed
*Optional - Add Discounted Tubeless Ready Rear Tire 700c

Details

Use the pulldown to search tires
*Optional - Add Colorado Composites 44mm Alloy Valve, Rear

Details

No Colorado Composites 44mm Alloy Valve Needed
*Optional - Add Discounted Sealant

Details

Use the pulldown to search sealant
*Optional - Add Discounted Front Tire 700c

Details

Use the pulldown to search tires
*Optional - Add Discounted Front Tube

Details

Use the pulldown to search tubes
*Optional - Add Discounted Rear Tire 700c

Details

Use the pulldown to search tires
*Optional - Add Discounted Rear Tube

Details

Use the pulldown to search tubes
*Optional - Add Discounted Skewers

Details

Customer does not need front and rear quick release skewers.
(This wheelset does not include quick release skewers, although quick release skewer sets are available in the pulldown menu.)

Description

Your Hope RS4 Disc custom wheelset with Easton R90 SL disc rims is proudly handbuilt in Colorado Springs, Colorado, USA.
Every wheel we turn out is built completely by hand to your specifications. All wheels are tensioned, stress-relieved, then re-tensioned before final truing. We have been building custom wheels since 1977 and take great pride in building the finest wheels available.

These rims can be used with standard tires and tubes, or tubeless tires. (For tubeless ready, please order tubeless tape and valves.) Never exceed your tire's recommended tire pressure.

Please Note:

  • Our wheels are built with a 2-cross or 3-cross lacing pattern (3-cross recommended.)
  • If you intend to use tubeless tires, make sure to select tubeless tape (from the rim tape pull-down menu) and to purchase tubeless valves (available in optional items at the bottom of your build.) Further, select tires from the "Tubeless Ready" tire selection.
  • If you choose to select optional items they will be installed on your wheels (with the exception of the sealant) unless otherwise specified. The sealant is not added because it can leak during shipping. If you are picking up your wheels at our retail location, we can add the sealant for you.
  • Manufacturer warranties are honored for the parts included in your build.
  • Custom wheels typically ship from our shop between 1-3 weeks after you've placed your order depending on how busy our shop is. However, if a part is not immediately available - from us or from our vendors - your build may take longer. We do our best to keep you updated on the situation, and are always happy to provide updates if you reach out. The easiest way to contact us for updates is to send us an email to support@coloradocyclist.com and we will respond as quickly as we can.
Nipple Information
Alloy nipples are much lighter than brass nipples (approximately 20g per wheel) and are recommended for light weight builds. Brass nipples are stronger and less expensive. We've been successfully building wheels with both for many years.

Spoke Information
Colorado Cyclist primarily uses DT Swiss stainless spokes in our builds. This has been our choice for wheel building since the late 1970's and we certainly owe part of our wheel building success to the strength and longevity that DT Swiss spokes offer. We also use the very popular, lightweight and bladed Sapim CX-Ray spokes and have had excellent success with them. Spoke weight, as well as a spoke Performance Chart, are provided in the pull-downs that you'll use to pick your spokes. The Perfomance Chart should be used as a guide to compare the various spokes. However, there are so many variables involved in building a wheel properly (ie. rider weight, terrain, intended use, price, etc.), you may end up with questions. If you need some help or advice, feel free to call or email us. We'll make recommendations based on your unique needs. 800-688-8600 or support@coloradocyclist.com.

NewCondition