Niner RIP 9 RDO Carbon Shimano XT M 780 3x10 Bike with Custom Wheels

$4,975.00

Select Frame
Show Details
The Niner RIP 9 RDO will re-awaken your passion for all-mountain riding. Niner took the ride quality and handling characteristics of the ground breaking RIP 9 and improved it on all levels with carbon frame, linkages, ISCG compatibility and additional travel. The unidirectional carbon frame employs bold swooping tubes that were engineered to be strong and take a ton of punishment. 125mm of fully active patented CVA suspension (designed from the ground up for 29-inch wheels) can be paired with either a 120 or 140mm fork to further fine tune the ride. The carbon links rotate on oversized Angular Contact Bearings for awesome lateral rigidity and immediate power transfer, and the integrated replaceable skid plate protects the bottom linkage so you can ride with confidence. The dropper post routing and ISCG 05 chainguide compatibility means you can build this frame to fit your riding style. The RIP 9 RDO features more tire clearance, full housing internal cable routing for a clean look and precision-machined alloy interfaces for the bottom bracket, direct-mount front derailleur and brake caliper post mounts. Handling has been improved with a tapered head tube up front and 142x12mm rear axle. Headset is not included.
Select Fork
Show Details
Master the mountain using the Fox 34 Talas 29 140 CTD-ADJ FIT 15QR 1.5T. The innovative CTD dial provides three distinct travel settings: Climb, Trail, and Descend making it easier than ever to dial in your fork for your current terrain. The Climb mode is obviously the firmest setting, offering the greatest pedaling efficiency. The Trail mode offers moderate low-speed compression setting is activated for an optimal blend of pedaling efficiency and bike control on variable terrain. Trail mode activates to full-open for maximum control and plush performance on steep, aggressive descents. If you're building a full suspension rig, this same CTD is paralleled in the rear shock, making it incredibly easy to balance the ride characteristics of the bike as a whole. CTD lever is easily in reach, at the crown of the fork. Travel adjustments are now easier and quicker with the 2-position, crown-mounted Talas lever that instantly changes travel between 140 and 110mm to improve climbing ability. The re-tooled FIT RLC damper reduces oil volume and lightens the fork, while a special head seal prevents dirt penetration for instant small bump response. 140mm travel. Shock pump is sold separately.

Fork Travel: 110-140mm
Spring: Air
Color: Black
Brake Type: Disc
Front Axle Type: 15mm Thru
Wheel Size: 29-inch
Steerer Tube: 1-1/2" to 1-1/8" Tapered
Weight: 4.6 lbs
Disc Mount Type: Post Mount
Select Pump
Show Details
The high-pressure Fox Factory Shox pump will pressure all Schraeder valve front and rear air suspension systems up to 300 PSI. Built-In air gauge with micro air release button for precise adjustments.
Select Hub
Show Details
Shimano's most popular front disc mountain hub, the XT M788, continues to deliver stellar performance with a steel axle and angular contact bearings for a long life and minimal friction. Designed for Shimano Centerlock rotors. Thru axle not included. 32-hole.

Hub Spacing: 100mm
Spoke Drilling: 32-hole
Axle Not Included

Select Rim
Show Details
This kit is priced using the Mavic XM 319 29" disc rim, a go anywhere, mid-range disc rim for hand building wheels.

  • Maxtel: Exclusive to Mavic, Maxtal aluminum alloy boosts rim strength by over 30% compared to 6106 alloy, for lighter and better performing rims.
  • SUP (Soudé Usiné Process): Produces an extremely strong, welded and milled rim joint offering superior wheel balance.
  • High-performance cross-mountain rim with Disc-brake compatibility. Black.
  • Weight: 445 g. (32 hole)
  • Drilling: 32 hole

Select Spoke Gauge
Show Details
DT Stainless Spokes
Spoke weights (estimated wt. of 32 spokes at 295mm):
14 gauge silver................ 241 grams
14 gauge black................ 241 grams
14-15 gauge silver........... 211 grams
14-15 gauge black........... 211 grams
14-17 gauge Revolution.... 153 grams
15 gauge silver................ 196 grams
15-16 gauge silver........... 171 grams
Select Spoke Nipples
Show Details
Nipple weights (estimated wt. of 32 nipples):
14 gauge brass................ 30.5 grams
14 gauge brass black........ 30.5 grams
14 gauge alloy silver......... 10 grams
14 gauge alloy colored....... 9.5 grams
14 gauge brass x-long....... 40 grams
15 gauge brass................ 32.5 grams
15 gauge alloy silver......... 11 grams
15 gauge alloy colored...... 10.5 grams
15 gauge brass x-long...... 40 grams
Select Tire
Show Details
The Maxxis CrossMark is the dramatic evolution of the Cross Country racing tire. The nearly continuous center ridge flies on hardpack, yet has enough spacing to grab wet roots and rocks. The slightly raised ridge of side knobs offers cornering precision never before seen on a tire this fast.

Size: 29 x 2.1
Weight: 605 g.
TPI: 60
Bead: Foldable
Max Psi: 65
Select Hub
Show Details
Shimano's most popular rear disc mountain hub, the XT M788, continues to deliver stellar performance with a steel axle and angular contact bearings for a long life and minimal friction. Designed for Shimano Centerlock rotors. Thru axle not included.
Select Rim
Show Details
This kit is priced using the Mavic XM 319 29" disc rim, a go anywhere, mid-range disc rim for hand building wheels.

  • Maxtel: Exclusive to Mavic, Maxtal aluminum alloy boosts rim strength by over 30% compared to 6106 alloy, for lighter and better performing rims.
  • SUP (Soudé Usiné Process): Produces an extremely strong, welded and milled rim joint offering superior wheel balance.
  • High-performance cross-mountain rim with Disc-brake compatibility. Black.
  • Weight: 445 g. (32 hole)
  • Drilling: 32 hole

Select Spoke Gauge
Show Details
DT Stainless Spokes
Spoke weights (estimated wt. of 32 spokes at 295mm):
14 gauge silver................ 241 grams
14 gauge black................ 241 grams
14-15 gauge silver........... 211 grams
14-15 gauge black........... 211 grams
14-17 gauge Revolution.... 153 grams
15 gauge silver................ 196 grams
15-16 gauge silver........... 171 grams
Select Spoke Nipples
Show Details
Nipple weights (estimated wt. of 32 nipples):
14 gauge brass................ 30.5 grams
14 gauge brass black........ 30.5 grams
14 gauge alloy silver......... 10 grams
14 gauge alloy colored....... 9.5 grams
14 gauge brass x-long....... 40 grams
15 gauge brass................ 32.5 grams
15 gauge alloy silver......... 11 grams
15 gauge alloy colored...... 10.5 grams
15 gauge brass x-long...... 40 grams
Select Rear Tire
Show Details
The Maxxis CrossMark is the dramatic evolution of the Cross Country racing tire. The nearly continuous center ridge flies on hardpack, yet has enough spacing to grab wet roots and rocks. The slightly raised ridge of side knobs offers cornering precision never before seen on a tire this fast.

Size: 29 x 2.1
Weight: 605 g.
TPI: 60
Bead: Foldable
Max Psi: 65
Select Tubes or Tubeless
Show Details
Please select whether you will be using conventional tubes with your wheels (you will be supplied both tubes and rimstrips), or if you'd prefer a tubeless option (you will be supplied both valve stems and rimstrips.)

NOTE: Mavic Crossroc XL WTS wheels include tires and tubes. The wheels are NOT tubeless compatable.
Select Tire Sealant ( Optional )
Show Details
Select Cassette
Show Details
The Shimano XT 10-speed cassette provides a more efficient and usable range of gears. The gears are arranged so that when you shift the front chainrings, you only have to adjust one gear in the back to 'recover' your gear. The XT cassette sprockets offer Shimano's patented Hyperglide shifting ramps and alloy carriers for great shifting and less weight. Shimano also offers a wide range of cassette choices with 11-32 for XC racers, 11-36 for all-day climbing, and 11-34 for everything in between.
Select Chain
Show Details
The Shimano XT CN-HG95 10-speed chain was developed specifically for MTB riding. This directional chain employs task-specific link plates to optimize front and rear shifting, and offers excellent mud shedding thanks to the special outer link plate design. A new Sil-Tec treatment on the plates allows them the freely pivot around derailleur pulleys, cogs, and chain rings with less friction. For use with 10-speed Shimano drivetrains only, will not work for road use. 283 g.
Select Crankset
Show Details
A favorite of trail riders, the Shimano XT M780 triple crankset, features an optimal gear ratio of 24x32x42 to provide what Shimano's engineers have found to be the widest range of 'useable' gears. The carbon composite reinforced middle ring sheds precious grams and provides smooth and quiet shifting.
Select Front Derailleur
Show Details
Clamp: E-Type bottom bracket mount
Weight: 165 g.

The Shimano XT M780-E Top Swing front derailleur is designed for use with the Shimano Dyna-Sys 10-speed, 3x10. The angled adjustment screws and clamp bolt make the new front derailleur more mechanically friendly.

Features
  • For use with Shimano 3x10 crankset
  • Forged aluminum body
  • Cable routing: Dual pull
Select Rear Derailleur
Show Details
Efficiency was the key principle when designing the Shimano Dyna-Sys XT M780 SGS 10-speed rear derailleur. The derailleur was designed with a longer swing arm and a tighter spring for crisper shifting when you want it, and less 'ghost shifting' when you don't. The Dyna-Sys rear derailleur will stay in adjustment longer and deliver consistent performance with each ride.
Select Shifter
Show Details
The Shimano XT SL-M780-10 Rapidfire shifters easily convert to either a double or triple crankset mode with the simple turn of a screw on the left shifter. Unique 2-way cable release accommodates individual riding styles or shifting (index finger or thumb.) The upper lever still performs the same function, but now swings both ways. Pull it with your finger or push it with your thumb. The fastening clamp offers variable positioning, allowing you to set up your cockpit just the way you'd like it. The optical gear display floats above the handlebar, or it can be removed completely. Shimano SIS-SP41 outer housing and coated stainless steel cable provide super smooth shifting. Includes front and rear shifters.
Select Front Brake
Show Details
This pre-bled brake system is ready to install with Shimano XT M785 Servo Wave levers, hydraulic lines, and M785 disc calipers. The XT M785 disc brake levers offer improved ergonomics, quicker engagement, and 20% more stopping power. Separate reach adjustment and free stroke adjustment allow you to customize levers for hand size and comfort. The XT M785 disc brake calipers get upgraded with Shimano's Ice technology, featuring radiator backed metal pads and oversized 22mm ceramic pistons. Sold as front or rear.
Select Brake Rotor
Show Details
Choose CENTER LOCK rotor for Shimano XT and XTR hubs. Choose a 6-BOLT rotor for ALL other hubs.
Select Rotor Adapter
Show Details
If you selected a 180mm rotor you will need to select a 180mm rotor adapter.
Select Rear Brake
Show Details
This pre-bled brake system is ready to install with Shimano XT M785 Servo Wave levers, hydraulic lines, and M785 disc calipers. The XT M785 disc brake levers offer improved ergonomics, quicker engagement, and 20% more stopping power. Separate reach adjustment and free stroke adjustment allow you to customize levers for hand size and comfort. The XT M785 disc brake calipers get upgraded with Shimano's Ice technology, featuring radiator backed metal pads and oversized 22mm ceramic pistons. Sold as front or rear.
Select Brake Rotor
Show Details
Choose CENTER LOCK rotor for Shimano XT and XTR hubs. Choose a 6-BOLT rotor for ALL other hubs.
Select Rotor Adapter
Show Details
Shimano SM-MA-R160 P/S Disc Brake Adapter: Shimano 74mm caliper adapter, 51mm IS-R - 160mm.
Select Headset
Show Details
Niner headset for WFO 9 and RIP 9 frames.
Select Carbon Stem Spacers
Show Details
Select Saddle
Show Details
This kit is priced using the Douglas Race Evolution Saddle Please select the Race Evolution (the first selection) from the drop-down menu.

Rail Material: Tubular Titanium
Weight: 248 g.

  • Race Evolution combines ergonomic comfort and pro-level performance
  • A recessed center channel is comfortable against soft tissues
  • Newtech foam delivers maximum cushioning
  • Shell is tuned for the perfect combination of flex and stiffness
  • Lightweight tubular titanium rails

Length: 282mm
Width: 136mm

Please select the Douglas Race Evolution Saddle or if you would prefer a different Saddle, choose any Saddle listed in the drop-down menu.
Select Seatpost
Show Details
This kit is priced using the Easton EA70 Zero Seatpost, Easton's EA70 Zero seatpost is built with high-end TaperWall aluminum tubing and features a 2-bolt integrated head, allowing micro adjustments of the saddle position. Sleek, low-profile saddle clamp provides excellent stability, grip and saddle compatibility. Please select the Easton EA70 Zero Seatpost (the first selections) from the drop-down menu.

Weight: 250 grams(30.9 mm)
Seatpost Material:Aluminium

Please select the Easton EA70 Zero Seatpost or if you would prefer a different Seatpost, choose any Seatpost listed in the drop-down menu.
Select Handlebar
Show Details
This kit is priced using the Easton EA70 Riser Bar, Integrating the high-performance of EA70 aluminum alloy with proprietary TaperWall technology yields Easton's strongest and most popular aluminum riser bar. At just 265 grams, the Easton EA70 Riser bar provides a true, no compromises weight and performance advantage. Available in 40mm or 20mm rises with popular 9º back sweep and 685mm width for precise steering and a customizable cockpit. Black.

Material: Aluminum
Clamp Diameter: 31.8mm
Bend: 9 deg.
Rise: 20 or 40mm
Width: 685mm
Weight: 265 g.

Please select the Easton EA70 Riser Bar or if you would prefer a different Bar, choose any Bar listed in the drop-down menu.
Select Handlebar Stem
Show Details
This kit is priced using the Easton EA90 SL stem, with lightweight 3D forged aluminum allows Easton to shave excess material while retaining maximum strength. The Top Lock clamp design and DST faceplate distribute pressure safely across the handlebar's clamping surface, making the EA90 SL safe for carbon and aluminum bars. 31.8" bar. Please select the Easton EA90 SL (the first selections) from the drop-down menu.

Weight: 130 grams(100 mm)
Stem Material:Aluminium

Please select the Easton EA90 SL Stem or if you would prefer a different stem, choose any stem listed in the drop-down menu.
Select Grips
Show Details
The Da Bomb Holy Shift Locking Grips are beautifully simple and offer a bomber hold with any hand position, wet or dry. A soft outer layer of Kraton rubber features a unique grid pattern on half of the grip. When you wrap your fingers around the grip they immediately fall into place within the grid for a secure hold. Plus, the grid offers the ability to move your hands around and still maintain grip in the pattern. The Holy Shifts are perfect for carbon bars because the internal plastic sleeves protect the carbon, while double lock-on clamps secure grips in place. (Clamps included.)

Description

Customize this Niner Rip 9 RDO frameset using the Shimano XT 3x10 groupset and custom handbuilt wheels. If you need some assistance, please don't hesitate to call us at 800-688-8600 and let us answer your questions and guide you through the process.

The Niner RIP 9 RDO will re-awaken your passion for "All-Mountain" riding. Niner improved the innovative ride quality and handling characteristics on all levels, featuring a carbon frame, carbon linkages, ISCG compatibility and additional travel. The RIP 9 RDO features more tire clearance, full housing internal cable routing, precision-machined alloy interfaces for the bottom bracket, direct-mount front derailleur and brake caliper post mounts. Handling has been improved with a tapered head tube up front and 142x12mm rear axle. The unidirectional carbon frame employs bold swooping tubes that were engineered to be strong and take a ton of punishment. 125mm of fully active patented CVA suspension (designed from the ground up for 29-inch wheels) can be paired with either a 120 or 140mm fork to further fine tune the ride. The carbon links rotate on oversized Angular Contact Bearings for awesome lateral rigidity and immediate power transfer, and the integrated replaceable skid plate protects the bottom linkage so you can ride with confidence. Dropper post routing and ISCG 05 chainguide compatibility means you can build this frame to fit your riding style.

If the size you need is not in-stock, please feel free to order. We'll have it here in a matter of days.

Frame: Unidirectional carbon fiber frame with carbon rear triangle and 125mm of patented CVA suspension. Post rear brake mounts. Shock: Fox Float CTD with Kashima. Frame Weight (Med):5.8 lbs. (with Fox Float CTD) Recommended Fork Travel: 120-140mm. Wheel Size: 29". 5 year warranty.

Model Number
niner-ninajn3w-c12
Item Code
NINAJN3W-C12
×

Colorado Cyclist Loyalty Rewards Program


How It Works


Place an order of $100 or more,
and receive loyalty credits
on qualifying items.

What Items Earn Loyalty?


Most regular and some sale items
earn you loyalty credits.

Please Note: Items purchased with
a coupon will not earn loyalty.


Where To Look



Look for the red message on
each item page.

Some items only show rewards
when they have been added to your cart.

Redeeming Rewards


Simply enter your loyalty
at the time of your next order.

Rewards are not transferrable,
or redeemable for cash or gift certificates.

Rewards will be adjusted on
returns to reflect earned value.

Please Note: Loyalty cannot be combined
with other promotional offers.

×