Menu

Shopping Cart

Edit Cart
Subtotal: $0.00
Checkout

Santa Cruz Tallboy Carbon CC SRAM X01 / XX1 29" Custom Bike - 2018

Select Santa Cruz Tallboy Frame

Details

The Santa Cruz Tallboy CC cuts a whole new swath across the trail bike landscape. As a 27+ bike, in desert-dry conditions the wider tires float above the dust and provide grip where standard tires flounder, and lower tire pressures pull the Tallboy through the slickest of root sections. In its 29-inch form, the Tallboy's renowned rowdy streak comes to the fore. Happy at full gas, up or down hill, the speed and agility of the 29er configuration will have you grinning. A 68 degree head angle and 110mm of VPP travel distills the original Tallboy's playful character into something all the more mischievous. Longer reach and shorter chainstays fuel that personality, and brings the Tallboy up to date with the rest of the Santa Cruz range. A flip chip on the upper link ensures geometry remains consistent across a vast range of build kits and sizes, from S to XXL. This CC-level carbon frame is every bit as stiff and strong as the C-level frames, but weighs about 280 grams less, due to the use of some lighter, stronger, and more expensive carbon fiber. Using this material in key places allowed for less material overall, which is what shaves off more than half a pound from the frame. Lifetime warranty. Shock pump is sold separately.

Frame: High-Grade Carbon CC chassis, 110mm VPP Suspension, 12x148 Rear Axle, 29-inch or 27.5 Plus-Compatible, One Bottle Cage Mount, Flip-Chip on upper link to maintain geometry, Integrated Headset (IS41/52), Internal carbon tubes ensure precise and hassle-free routing of derailleur and seat post cables, removable front derailleur mount, Threaded Bottom Bracket, ISO brake mounts accommodate up to 185mm rotors. Shock: Fox Float Factory DPS Kashima. Frame Weight (Med): 5 lbs. 3oz. Recommended Fork Travel: 120-130mm. Wheel Size: 29-inch and 27.5+. Seatpost: 31.6mm

Select 29" Fork, Tallboy

Details

Designed for the aggressive trail rider, the Fox 34 Float has been completely re-imagined from the inside out; featuring an FIT4 damper, FLOAT air spring, and super lightweight chassis. It drops significant weight while providing improved trail performance that instills confidence and control. The FIT4 damper provides three on-the-fly compression damping positions - Open, Medium, and Firm - to adapt to varying trail conditions. The Fox Factory 34 forks feature an additional 22 clicks of low-speed compression adjust in the Open mode, allowing riders to fine-tune their exact damping preferences. The FLOAT air spring system is lighter and reduces the force to initiate travel, providing excellent small bump compliance for all riders and pressure settings. The super-slick Kashima coated fork stanchions are hard-wearing, increasing shock smoothness and sensitivity.

Fork Travel: 130mm
Axle Width: 110mm/Boost
Spring: Float Air
Offset:51mm
Damper: FIT4 3-Pos Lever w/adj
Upper Tube Finish: Kashima Coat
Color: Matte Black
Brake Type: Disc
Front Axle Type: 110mm x 15mm Thru
Wheel Size: 29-inch
Steerer Tube: 1.5" Tapered
Weight: 3.98 lbs
Optional: Add a pump

Details

No Pump With Order
Select Tapered Headset, 1-1/8 to 1-1/2"

Details

The Cane Creek 40-Series headset sets the standard for performance, durability and value. 40-series upper, IS41/28.6 black and 40-series lower, IS52/40 black.

Technical Description: IS41/28.6/H9/K / IS52/40/H1
Top Type: IS - Integrated
Top Head Tube Inside Diameter: 41.1mm
Stem Clamp Diameter: 28.6mm
Top Stack Height: 9mm
Top Bearing Type: Black Oxide, Sealed Bearings
Bottom Type: IS - Integrated
Bottom Head Tube Inside Diameter: 52.1mm
Crown Race Seat Diameter: 39.79mm
Crown Race Type: Steel, Face-Sealed
Bottom Stack Height: 1mm
Bottom Bearing Type: Black Oxide, Sealed Bearings
Material: 6061 Aluminum
Part Number: BAA0741K
Weight: 87 grams

Select 31.6 Seatpost, Internal Dropper or Rigid

Details

The Crank Brothers Highline Dropper Seatpost delivers with premium sealing, exclusive igus bearing and keys, jag wire cable and a self-contained hydraulic cartridge for industry leading quality and reliability. Years of research, development and rigorous testing has given rise to the world's finest dropper post and remote, backed by an industry leading 3-year warranty. The Highline features the world's most ergonomic remote: unique spherical adjustment, with near-infinite rotation and tilt customization options, for perfect cockpit ergonomics. The seatpost delivers internal cable routing, with quick-connect mechanism for ease of cable installation, and a two-bolt quick release head for easy saddle installation.

Material:7075-T6 Aluminum
Length: 400mm
Adjustable Drop: 125mm
Diameter: 30.9mm, 31.6mm
50mm minimum stack height
Weight:580 grams
Warranty:3 years

If Necessary Select Dropper Lever (Required For Fox Droppers)

Details

Select Carbon Stem Spacers

Details

1 1/8-inch Douglas Carbon Headset Spacer Kit. Kit includes qty two 5mm spacers and two 10mm spacers for a total of 30mm.
Select Cassette, X01 / XX1 Package

Details

Ride anywhere with the wide range SRAM XG-1275, 10- to 50-tooth Eagle cassette that provides the right gear. Fast on the flats. Control on the climbs. Dictate your own pace, anywhere. Only Eagle technology is the 1x drivetrain engineered for infinite freedom. FULL PIN technology uses lightweight, stamped steel cogs held together with high-strength stainless steel pins. The result: a cassette that's light and strong. The open design is similar to SRAM X-DOME cassette that aids in mud clearance, giving you cleaner shifting performance and longer component life. New X-GLIDE 2 improves inboard and outboard shifting, as well as chain retention.

Gear Range: 10x50, 12-speed
Weight: 450 grams
Ratio:
10-50t: 10-12-14-16-18-21-24-28-32-36-42-50
Select Chain, X01 / XX1 Package

Details

The SRAM GX Eagle chain is designed with Eagle geometry, and features solid pin construction, Eagle PowerLock and smooth, efficient shifting that you can count on every time out. The Eagle chain's links have a smooth radius, with no sharp edges or chamfers, which yield a significant reduction in noise, friction and wear on chainrings and cassette cogs. This design also allows for a flatter plate, which means more consistent chain riveting and greater overall strength. 114 links, 12-speed, 258 grams.

Select Crank or Crankarms for X01 / XX1 Package

Details

The SRAM GX Eagle DUB Crankset delivers consistent performance every time out. Featuring SRAM's X-SYNC 2 tooth profile chainring, the GX crankset is engineered for complete chain control. Each tooth's thickness is precisely tolerance and controlled to work seamlessly with the chain's inner and outer links. SRAM DUB technology features a better-engineered bottom bracket and a new spindle design. Together, these allow for a more uniform approach to bottom bracket fitment, better sealing against contamination and forward and backward compatibility. Now everyone can benefit from a new measure of durability. The GX1 Eagle DUB aluminum crankset requires a SRAM DUB bottom bracket, sold separately.

Lengths: 170mm, 175mm
Chainring: 32t included
Weight: 621 grams
12-speed
DUB Bottom Bracket Sold Separately

If Necessary Select Chainring for X01 / XX1 Package

Details

Select Bottom Bracket, SRAM, Santa Cruz

Details

The relationship between bottom bracket spindle and bearing is the core of SRAM DUB BB technology. It's where stiffness meets durability. SRAM took it a step beyond conventional thinking and made everything simpler and better integrating the relationship between chainring, crank, spindle and bottom bracket. It's this clear system approach that equals better drivetrain performance. DUB bottom brackets fit all frame shell standards, and does NOT introduce any new frame shell standards.

Compatibility: BSA 68/73mm Threaded BB Shells
Weight: 76 grams
For use with SRAM DUB Cranksets.

If Necessary Select Chris King BB Conversion Kit

Details

Select Rear Shifter, X01 / XX1

Details

The SRAM GX Eagle Trigger Shifter is the control center of the Eagle drivetrain. Its internal works have been updated to include a 12th gear, and improved to enhance trigger feel, precision and durability. The challenges of riding a mountain bike should be kept to roots, rocks, mud, trees, jumps, drops and breathing. Putting total control of your gear selection into the thumb of one hand, it's simple to find the right gear, right now. Please note: cables are included but housing is not.

Features
  • 12-speed
  • Zero Loss engagement for fastest shifting
  • MatchMaker X compatible
  • Weight: 122 grams


Select Rear Derailleur, X01 / XX1

Details

The SRAM GX Eagle Rear Derailleur not only answers the Eagle drivetrain's need for greater capacity, but it's also the next evolution of SRAM's proven, 1x-specific X-HORIZON design. The larger, 14-tooth X-SYNC lower pulley allows 10- to 50-tooth cassette, and also adds to Eagle's overall smooth-pedaling feel. The Type-3 ROLLER BEARING CLUTCH features a smoother torque curve for a quieter, more consistent operation and feel. CAGE LOCK has been moved back and out of the way, protecting it from trail debris. And a redesigned, robust mounting system further improves the Eagle derailleur's performance and overall durability.

For 1x12 MTB gearing configurations
Weight: 290 grams
12-speed compatible

Select Front Mountain Brake

Details

The new SRAM Guide RSC Disc Brake is packed with ride-enhancing, performance features that make every new trail a trusted old friend. The brand new design features SwingLink for more positive pad engagement, silky-smooth modulation and better lever-feel. Tool-free reach and contact point adjustment allows you to customize your lever throw preference, while the smooth lever pivot bearings and SRAM's new timing port closure provides dependable braking power and consistency on every ride. The ambidextrous mounts are MatchMaker compatible, so you can use your RockShox remote on the same mount. Rotors are not included and sold separately. Metallic pads included. 375 grams. (Front or Rear)

Hint for breaking-in: New disc brake pads require a certain break-in period in order to provide the full brake power. The following procedure has proved oneself: drag braking on a downhill until the brake power noticeably increases. Then let the brake rotor cool out. Afterwards do 20 full stops braking from a medium speed. Attention: the rotors get very hot, do not touch them!
Select Front Rotor Mountain

Details

The SRAM Centerline Rotor is designed to keep the center of friction consistent throughout the rotor rotation thereby minimizing vibration and providing consistent performance for a quiet ride. Rotor size: 160mm.
If Necessary Select Front Adapter Needed for 180/203mm Sram rotors

Details

Select Rear Mountain Brake

Details

The new SRAM Guide RSC Disc Brake is packed with ride-enhancing, performance features that make every new trail a trusted old friend. The brand new design features SwingLink for more positive pad engagement, silky-smooth modulation and better lever-feel. Tool-free reach and contact point adjustment allows you to customize your lever throw preference, while the smooth lever pivot bearings and SRAM's new timing port closure provides dependable braking power and consistency on every ride. The ambidextrous mounts are MatchMaker compatible, so you can use your RockShox remote on the same mount. Rotors are not included and sold separately. Metallic pads included. 375 grams. (Front or Rear)

Hint for breaking-in: New disc brake pads require a certain break-in period in order to provide the full brake power. The following procedure has proved oneself: drag braking on a downhill until the brake power noticeably increases. Then let the brake rotor cool out. Afterwards do 20 full stops braking from a medium speed. Attention: the rotors get very hot, do not touch them!
Select Rear Rotor Mountain

Details

The SRAM Centerline Rotor is designed to keep the center of friction consistent throughout the rotor rotation thereby minimizing vibration and providing consistent performance for a quiet ride. Rotor size: 160mm.
Select Rotor Adapter

Details

Shimano SM-MA-R160 P/S Disc Brake Adapter: Shimano 74mm caliper adapter, 51mm IS-R - 160mm. For 74mm caliper on 51mm frame, using 160mm rotor. Brake Caliper Type: Post Mount Mount/Rotor Size: Rear IS/160 Rotor. Includes mounting hardware.
Select Handlebar Stem for Mountain Group

Details

The Spank Oozy Trail Stem is the perfect blend of XC lightweight, Spank's famous gravity-worthy performance, and style in design. The true zero degree bar clamp and short 35mm stack height improves rider position and comfort on 27.5" and 29" frames. The unique hourglass shape eliminates twisting/torque and allows thinner wall thicknesses for weight reduction while enhancing the stiffness of the stem. The clamping zones are thickened to ensure maximum strength and security, as well as improved fatigue life.

Material: 6-Series Alloy, 3D Forged
Rise: True 0 degree Rise (dropped barclamp)
Clamp: 31.8mm
Length: 50, 65, 75mm
Steerer: 1 1/8"
Custom Snap-Fit Sealed Topcap Included
Weight: 150 g.(50mm), 165 g.(65mm), 175 g.(75mm)

Select Handlebar for Mountain Group

Details

The Race Face Turbine Flat Wide Handlebar will get you low and in control. This bar is manufactured from cold drawn, seamless 7050 aluminum for comfort and performance at an impressive 240 grams weight. The Turbine Flat bar is butted to create an optimal strength to weight ratio resulting in one tough but light bar, and is shot peened for increased fatigue life. The Race Face Turbine Flat bar has a 720mm width for increased control without sacrificing its lightweight characteristics. 29ers rejoice!

Material: 7050 Alloy
Clamp Diameter: 31.8mm
Bend: 8° rearward
Rise: 0mm
Width: 720mm
Weight: 240 grams

Select Grips for Mountain Bars

Details

The Da Bomb Holy Shift Locking Grips are beautifully simple and offer a bomber hold with any hand position, wet or dry. A soft outer layer of Kraton rubber features a unique grid pattern on half of the grip. When you wrap your fingers around the grip they immediately fall into place within the grid for a secure hold. Plus, the grid offers the ability to move your hands around and still maintain grip in the pattern. The Holy Shifts are perfect for carbon bars because the internal plastic sleeves protect the carbon, while double lock-on clamps secure grips in place. (Clamps included.)
Select Saddle for Mountain Group

Details

The WTB Volt Pro is the next evolution in WTB saddles. Thin-Line style compact padding borrowed from the Silverado saddle compliments subtle curves and a combination of popular features from several of WTB saddles. A slight whale tail and gentle drop to the nose provide something to push against while not limiting riders to one seating position. This saddle has enough padding for all day riding comfort, but is light in weight for XC competition, gaining it endless acclaim and popularity among riders. The WTB Volt Pro Cromoly Saddle features DNA padding and Flex-Tuned shell with a durable Microfiber cover.

Rail Material: Cromoly
Weight: 219 g. (135mm), 226 g. (142mm)
Length: 260mm
Width: 135mm or 142mm

Select Factory Wheels or Custom Wheels Below

Details

Lightweight, dependable, and affordable, the Mavic XA Elite WTS Wheelset is ready to tackle any Enduro adventure. The hammer hardened black anodized rims improve life expectancy and add strength for resistance to micro cracking, where the spokes exert the greatest stress. Additionally, a wide 25mm internal rim width adds overall strength while increasing a tires' contact patch. Rims are machined both on the sidewall and inner diameter to shave weight without compromising strength. Fast rolling ITS-4 hubs use 4 pawls, working 2 by 2, to provide very fast engagement and improved ride dynamics. This wheelset is provided with Mavic's Tubeless Compatible Quest Pro 2.35 Tires for versatile and rolling speed in any terrain. 24Front/24Rear (2-cross lacing) bladed steel spokes with alloy nipples. The wheels are Boost 15x110mm thru-axle up front; Boost 12x148mm for the rear. Weight: 815g front, 955g rear. 6-bolt disc brake, Shimano or SRAM XD and UST tubeless compatible. Internal width: 25 mm.

Weight: 1770 grams/pair without tires.
Size: 29-inch
Front Axle: Boost 15 x 110mm thru-axle
Rear Axle: Boost 12 x 148mm

Important Information
Shop time: Please allow 3-5 business days prior to shipping for orders that include factory wheels.
Adult signature required for delivery of wheels.
If Necessary Select 29" Front Tire

Details

If Necessary Select 29" Rear Tire

Details

Select Front Hub, 110/15mm

Details

Select 29" Front Rim

Details

Select Spokes, Front Wheel

Details

Select Front Nipples

Details

Select Rear XD Hub, 148/12mm

Details

Select 29" Rear Rim

Details

Select Spokes, Rear Wheel

Details

Select Rear Nipples

Details

Includes Both Tubes & Tubeless Kit

Details

Build includes tubes, rim tape, valves, & sealant. NOTE: Bikes are always shipped with tubes in the wheels, not the sealant.
Optional - Add Pedals

Details

Optional - Add Bike Protection Tape

Details

Optional - Add Front Fender

Details

Optional - Add Rear Fender

Details

Description

Build a custom 2018 Santa Cruz Tallboy 29" with SRAM components. All custom wheels are built 32 hole with a 3-cross lacing pattern, and j bend spokes. For different wheel options or questions on pricing, sizing & builds, please email support@coloradocyclist.com. Please note, the bike or other parts of your build may need to be ordered. Because of the possibility of backordered items + shop time, it will take approximately 1-3 weeks to turnaround your bike.

The Santa Cruz Tallboy CC cuts a whole new swath across the trail bike landscape. As a 27+ bike, in desert-dry conditions the wider tires float above the dust and provide grip where standard tires flounder, and lower tire pressures pull the Tallboy through the slickest of root sections. In its 29-inch form, the Tallboy's renowned rowdy streak comes to the fore. Happy at full gas, up or down hill, the speed and agility of the 29er configuration will have you grinning. A 68 degree head angle and 110mm of VPP travel distills the original Tallboy's playful character into something all the more mischievous. Longer reach and shorter chainstays fuel that personality, and brings the Tallboy up to date with the rest of the Santa Cruz range. A flip chip on the upper link ensures geometry remains consistent across a vast range of build kits and sizes, from S to XXL. This CC-level carbon frame is every bit as stiff and strong as the C-level frames, but weighs about 280 grams less, due to the use of some lighter, stronger, and more expensive carbon fiber. Using this material in key places allowed for less material overall, which is what shaves off more than half a pound from the frame. Lifetime warranty. Shock pump is sold separately.

Frame: High-Grade Carbon CC chassis, 110mm VPP Suspension, 12x148 Rear Axle, 29-inch or 27.5 Plus-Compatible, One Bottle Cage Mount, Flip-Chip on upper link to maintain geometry, Integrated Headset (IS41/52), Internal carbon tubes ensure precise and hassle-free routing of derailleur and seat post cables, removable front derailleur mount, Threaded Bottom Bracket, ISO brake mounts accommodate up to 185mm rotors. Shock: Fox Float Factory DPS Kashima. Frame Weight (Med): 5 lbs. 3oz. Recommended Fork Travel: 120-130mm. Wheel Size: 29-inch and 27.5+. Seatpost: 31.6mm

NewCondition